HYRIG can supply API 6D DBB ball valves. The API 6D DBB ball valve is a trunnion-mounted valve with bi-directional sealing seats. This design allows operators to verify complete isolation by bleeding the body cavity.
| Feature | Standard Floating Valve | DBB Trunnion Valve |
|---|---|---|
| Upstream Seal | Unsealed (relies on downstream) | Sealed (spring-loaded) |
| Downstream Seal | Sealed | Sealed (spring-loaded) |
| Cavity Bleed | Not possible (single seal) | Yes (vent port between seats) |
| Isolation Verification | No | Yes (by bleeding cavity) |
| Typical Size | NPS 1/2 - 10 | NPS 1 1/2 - 36 |
| Dimension | Standard |
|---|---|
| Face-to-Face | ASME B16.10 |
| Flange Ends | ASME B16.5 / B16.47 |
| Cavity Bleed Port | NPT or Flanged |
The DBB function is achieved using a trunnion-mounted ball with two independent spring-loaded seats. When the valve is closed, the upstream seat blocks flow from the line, and the downstream seat blocks flow from the cavity. By opening the bleed valve in the body cavity, the operator can verify that both seats are holding tight. If the pressure bleeds down to zero, isolation is confirmed, and maintenance can proceed safely.
Upgrading to a DBB valve requires checking: 1. Availability of a cavity bleed port on the piping. 2. Face-to-face dimension (ASME B16.10). 3. Actuator compatibility (DBB valves require less torque than floating valves at high pressures).
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Looking to implement DBB isolation in your pipeline? Provide your line size and pressure class, and our engineers will recommend the correct trunnion valve and bleed port configuration.
Q: What is the difference between DBB and DIB?
DBB (Double Block and Bleed) uses two independent seats to isolate and bleed the cavity. DIB (Double Isolation and Bleed) is a variation where either the upstream or downstream seat provides bidirectional sealing, depending on the pressure direction.
Q: Can a floating ball valve be used for DBB?
No. Floating ball valves only have a reliable downstream seal and do not provide the independent upstream sealing required for DBB.
Q: Is a bleed port always required for DBB?
Yes. To verify isolation, the body cavity must have a port to release trapped pressure between the two seats.
For API 6D DBB ball valve selection, contact HYRIG: info@hyrig.com