HYRIG can supply the API 6D trunnion ball valve range. The NPS 8 Class 150 trunnion ball valve is a full bore, large-diameter isolation valve. It utilizes a trunnion-mounted ball and spring-loaded seats to ensure low operating torque and reliable sealing in low-pressure mainlines.
| Parameter | Value |
|---|---|
| Design Standard | API 6D, ASME B16.34 |
| Size | NPS 8 (DN 200) |
| Pressure Class | Class 150 |
| Bore Diameter (d) | 201 mm |
| Face-to-Face (RF) | 457 mm |
| Face-to-Face (BW) | 521 mm |
| Height (H) | 325 mm |
| Center to Bottom (H1) | 240 mm |
| Handwheel Diameter (W) | 400 mm |
| Weight (Handwheel) | 166 kg |
| Dimension | Value |
|---|---|
| Face-to-Face (RF) | 457 mm |
| Face-to-Face (BW) | 521 mm |
| Flange Standard | ASME B16.5 |
| Butt Weld End | ASME B16.25 |
| Actuator Mounting | ISO 5211 |
The ball is anchored mechanically, so line pressure does not force it into the downstream seat. This design significantly reduces the operating torque required for large-diameter valves. The spring-loaded seats provide bidirectional sealing, enabling DBB (Double Block and Bleed) isolation capability.
When replacing a large-diameter floating valve with this trunnion model, verify: 1. Face-to-face dimension (457 mm RF vs. 521 mm BW). 2. Actuator torque (trunnion requires significantly less torque). 3. Piping support (trunnion valve has a higher profile/weight than a floating valve).
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need a large-diameter isolation valve? Share your line size, pressure class, and actuator requirements, and our engineers will confirm the specifications.
Q: What is the weight of the NPS 8 Class 150 valve?
The valve weighs approximately 166 kg with a handwheel operator.
Q: What is the face-to-face dimension for RF and BW?
The RF dimension is 457 mm, and the BW dimension is 521 mm, conforming to ASME B16.10.
Q: Can this valve be automated?
Yes. The valve is equipped with an ISO 5211 mounting pad for pneumatic or electric actuators. The low torque of the trunnion design makes automation easier.
Q: What is the typical lead time?
Standard lead time is typically 4 to 6 weeks depending on material and end connection.
For API 6D trunnion ball valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.