HYRIG can supply the API 6D trunnion ball valve range. The NPS 10 Class 300 trunnion ball valve is a full bore, large-diameter isolation valve. It features a robust trunnion-mounted ball and bi-directional seats to ensure reliable sealing in medium-pressure pipelines.
| Parameter | Value |
|---|---|
| Design Standard | API 6D, ASME B16.34 |
| Size | NPS 10 (DN 250) |
| Pressure Class | Class 300 |
| Bore Diameter (d) | 252 mm |
| Face-to-Face (RF) | 568 mm |
| Face-to-Face (BW) | 559 mm |
| Height (H) | 370 mm |
| Center to Bottom (H1) | 303 mm |
| Handwheel Diameter (W) | 500 mm |
| Weight (Handwheel) | 403 kg |
| Dimension | Value |
|---|---|
| Face-to-Face (RF) | 568 mm |
| Face-to-Face (BW) | 559 mm |
| Flange Standard | ASME B16.5 |
| Butt Weld End | ASME B16.25 |
| Actuator Mounting | ISO 5211 |
The ball is anchored by upper and lower bearings. The spring-loaded seat rings press against the ball from both sides, providing reliable bidirectional sealing. The trunnion design minimizes operating torque, making it suitable for large-diameter valves where manual or actuator operation requires predictable force.
When replacing an existing NPS 10 valve, verify: 1. Face-to-face dimension (568 mm RF vs. 559 mm BW). 2. Flange standard (Class 300 ASME B16.5). 3. Piping layout (account for the larger H1 dimension and weight). 4. Actuator torque requirements.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help specifying an NPS 10 Class 300 valve? Provide your line pressure, medium, and end connection requirements, and our engineers will confirm the exact model.
Q: What is the weight of the NPS 10 Class 300 valve?
The valve weighs approximately 403 kg with a handwheel operator.
Q: What is the face-to-face dimension?
The RF dimension is 568 mm, and the BW dimension is 559 mm, conforming to ASME B16.10.
Q: Can this valve be used for pigging?
Yes. The full bore design ensures the bore diameter matches the pipeline inner diameter, allowing pigs to pass through.
Q: What is the typical lead time?
Standard lead time is typically 5 to 7 weeks due to the larger size and weight.
For API 6D trunnion ball valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.