HYRIG can supply the API 608 floating ball valve range. The NPS 6 Class 300 floating ball valve is a 2-piece bolted body valve with a PTFE seat. It is suitable for medium-pressure general service where a cost-effective isolation solution is required.
| Parameter | Value |
|---|---|
| Design Standard | API 608, ASME B16.34 |
| Size | NPS 6 (DN 150) |
| Pressure Class | Class 300 |
| Bore Diameter (d) | 150 mm |
| Face-to-Face (RF) | 403 mm |
| Face-to-Face (RTJ) | 419 mm |
| Height (H) | 310 mm |
| Handwheel Diameter (W) | 800 mm |
| Weight (Handwheel) | 107 kg |
| Dimension | Value |
|---|---|
| Face-to-Face (RF) | 403 mm |
| Face-to-Face (RTJ) | 419 mm |
| Flange Standard | ASME B16.5 |
| Butt Weld End | ASME B16.25 |
| Actuator Mounting | ISO 5211 |
The ball floats between the seat rings. Line pressure pushes the ball into the downstream seat, creating a seal. At Class 300 and NPS 6, the operating torque is higher than a trunnion valve, so the handwheel is larger (800 mm) to provide the necessary mechanical advantage.
When replacing an existing NPS 6 Class 300 valve, verify: 1. Face-to-face dimension (403 mm RF). 2. Operating torque (ensure the actuator can handle the higher torque of a floating valve at this size). 3. Piping layout to accommodate the large handwheel.
Not sure if a floating valve is suitable for your NPS 6 line? Share your pressure and medium, and our engineers will help you decide between floating and trunnion designs.
Q: What is the weight of the NPS 6 Class 300 valve?
The valve weighs approximately 107 kg with a handwheel operator.
Q: What is the face-to-face dimension?
The face-to-face dimension is 403 mm for RF ends and 419 mm for RTJ ends, conforming to ASME B16.10.
Q: Why is the handwheel so large?
At NPS 6 Class 300, the floating ball design requires higher operating torque. The 800 mm handwheel provides the mechanical advantage needed for manual operation.
Q: What is the typical lead time?
Standard lead time is typically 4 to 5 weeks depending on material.
For API 608 floating ball valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.