HYRIG can supply the API lubricated plug valve range. The valve uses an inverted pressure balance design and a sealant injection system to maintain a tight seal and reduce operating torque. It is suited for high-pressure gas, dry service, and applications where soft PTFE sleeves cannot be used.
| NPS | DN | Class 150 L (mm) | Class 150 H (mm) | Class 150 Wt (kg) | Class 300 L (mm) | Class 300 H (mm) | Class 300 Wt (kg) |
|---|---|---|---|---|---|---|---|
| 1/2 | 15 | 108 | 180 | 10 | 140 | 180 | 12 |
| 1 | 25 | 127 | 185 | 14 | 165 | 185 | 16 |
| 2 | 50 | 178 | 215 | 21 | 216 | 215 | 24 |
| 3 | 80 | 203 | 270 | 33 | 283 | 270 | 36 |
| 4 | 100 | 229 | 300 | 48 | 305 | 300 | 61 |
| 6 | 150 | 267 | 365 | 98 | 403 | 365 | 130 |
| 8 | 200 | 292 | 400 | 125 | 419 | 400 | 190 |
| 12 | 300 | 356 | 510 | 230 | 502 | 510 | 380 |
Data source: Technical data table.
| Dimension | Standard |
|---|---|
| Face-to-face | ASME B16.10 / API 6D |
| Flanged ends | ASME B16.5 |
| Butt weld ends | ASME B16.25 |
| Pressure-temperature rating | API 599 |
The lubricated plug valve features a tapered plug rotating inside a metal body. The sealing is maintained by injecting a special sealant (lubricant) into the grooves between the plug and the body. This sealant displaces the process fluid and creates a hydraulic seal.
The inverted pressure balance design means that line pressure acts on the bottom of the plug, pushing it upward against the cover. This reduces the friction between the plug and the body, significantly lowering the operating torque compared to a standard plug valve. It also prevents the plug from jamming under high pressure.
Because the sealant can be injected while the valve is in service, the lubricated plug valve is highly reliable in dry gas service or high-pressure applications where a soft PTFE sleeve would extrude or degrade.
Replacing a lubricated plug valve requires checking:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation. The sealant injection system must be maintained per the manufacturer's schedule to ensure sealing integrity.
Q: What is the difference between a sleeve type and a lubricated plug valve?
A sleeve type uses a PTFE liner for soft sealing. A lubricated type uses sealant injection to maintain the seal, making it suitable for high-pressure and dry gas service.
Q: How often does the sealant need to be injected?
The injection frequency depends on the service conditions. For clean gas, it may be once a year. For dirty or high-temperature service, it may be more frequent. Follow the maintenance schedule.
Q: Can a lubricated plug valve be used for slurries?
It is not recommended for abrasive slurries because the sealant can be washed away or contaminated. For slurries, a sleeve type or a different valve design is preferred.
Q: What is the typical lead time?
Standard lead time is 4 to 6 weeks depending on size, class, and material.
To confirm the correct lubricated plug valve for your line, provide the medium, operating pressure, temperature, and whether a sealant injection system is required. Our engineering team will verify the configuration.
For API lubricated plug valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.