The API 610 BB2 heavy oil pump is a between‑bearing, single‑stage, single‑suction, radially split horizontal centrifugal pump. It is the workhorse for all heavy oil, high temperature, high viscosity, and coking‑prone refinery services. Overhung OH2 pumps are not suitable for these severe conditions. BB2 is the mandatory choice for any heavy oil application.
Heavy Oil Media Covered by BB2
All residues: atmospheric residue, vacuum residue, coker residue
Gas oils: vacuum gas oil (VGO), atmospheric gas oil, coker gas oil
Hydrocracker feed and heavy hydrotreater feed
Tower bottom oils: fractionator bottoms, crude tower bottoms, coker fractionator bottoms
Heavy fuel oil, heavy aromatics, slurry oil, high temperature recycle oil
Common Characteristics of Heavy Oil Services
Temperature: 220 – 420°C (ultra‑high temperature)
Viscosity: High to very high – solidifies upon cooling
Solids: Coke fines, carbon particles, Conradson carbon residue
Corrosion: Often sour (H₂S) – requires NACE MR0175
Operation: 24/7 continuous, heavy duty, high pressure, thermal cycling
Why BB2 is the Heavy Oil Workhorse
Between bearing support – impeller between two bearings. Extremely rigid shaft, minimal thermal deflection, low vibration, handles high radial and axial loads.
Radially split casing – uniform thermal expansion, low nozzle stress, easy maintenance.
Steam jacketing – full jackets prevent heavy oil from cooling, solidifying, and coking inside the pump.
High axial thrust capacity – far superior to OH2, essential for high viscosity, high differential pressure services.
Heat & corrosion resistant materials – WC9/C12A casings, 12% chrome impellers, forced lube cooling, API 682 dual barrier seals.
Key Design Features for Heavy Oil BB2
Casing: Radially split, WC9 or C12A heat resistant alloy, full steam or thermal oil jacketing.
Seals: API 682 dual mechanical seals, Plan 53B (bladder accumulator) or Plan 54 (circulated barrier fluid). Prevents coking and fouling.
Bearings: Forced feed lubrication with oil cooler; dissipates conducted heat from high temperature fluid.
Materials: NACE MR0175 for sour service; impeller and wear rings in 12% chrome or CA6NM.
Light Oil vs. Heavy Oil – Ultimate Pump Type Division
| Pump Type | Services |
|---|---|
| OH2 (overhung) | Crude oil (ambient), diesel, kerosene, jet fuel, gasoline, naphtha, LPG, condensate, aromatics, solvent oils – low to medium temperature, clean, volatile, no coking, low solids |
| BB2 (between bearing – heavy oil workhorse) | Atmospheric residue, vacuum residue, slurry, VGO, coker gas oil, hydrocracker feed, high temperature tower bottoms, heavy fuel oil, high temperature recycle oil – all heavy, high viscosity, high temperature, coking tendency, fines, continuous thermal duty |
One Sentence Summary
All high temperature, high viscosity, coking, solids‑containing heavy oils – use BB2. All ambient to medium temperature, clean, volatile light oils – use OH2. BB2 is the refinery's heavy oil workhorse.
For complete technical datasheets, sizing assistance, or a quotation for any API 610 BB2 heavy oil pump (residue, VGO, slurry, hydrocracker feed, tower bottoms), please contact info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.