The API 610 VS6 vertical suspended barrel pump is a vertically suspended, multistage, double‑casing (barrel type) pump designed for dry pit installation. It is the mandatory pump standard for saturating, low boiling point, highly volatile light hydrocarbons that are prone to cavitation and flashing when pumped with horizontal overhung (OH2) or between‑bearing (BB2) configurations.
Exclusive Media for VS6 (All volatile, low boiling point, high vapour pressure, cavitation‑prone)
LPG (propane, butane, mixed LPG)
Condensate (natural gas condensate, field condensate)
Light naphtha, light straight run naphtha
Gasoline, light aromatics (benzene, toluene, xylene – low pressure applications)
Liquefied light hydrocarbons, tower overhead reflux, saturated condensate
Low temperature light hydrocarbons, LPG tank farm transfer, truck/rail loading
Why VS6 is Mandatory for Volatile Light Ends
Ultra‑low NPSH – immersed suction (pump bowl submerged in liquid) and barrel pressurisation provide the lowest possible NPSH requirement. Eliminates cavitation, flashing, and vapor lock – the #1 failure mode for light end pumps.
Vertical barrel + multistage – barrel casing contains high pressure; multistage impellers deliver medium to high head (up to 600+ metres) without cavitation.
No suction piping losses – direct suction from tank top or vessel nozzle. Eliminates inlet line pressure drop and vapour binding.
Superior seal safety – mechanical seal located at the top, above the liquid column. Liquid phase below, vapour phase above. Seal runs in clean barrier fluid – no dry running, no rapid wear. Much safer than horizontal pumps for flammable, volatile media.
Operating Envelope
Temperature: –50°C to +120°C (cryogenic to warm light hydrocarbons)
Pressure: Medium to high – Class 600, 900 or higher (barrel casing rated for full discharge pressure)
Fluid: Clean, low viscosity, saturated, high vapour pressure
Applications: Spherical tank farm, LPG loading/unloading, light ends recovery unit, tower overhead saturated liquid transfer, refinery flare knock‑out drum pumping
Key Design Features
Double casing (barrel type) – withstands flash pressure surges, contains hazardous leakage.
Multistage hydraulics – high head with low NPSHr, suitable for booster service.
API 682 dual mechanical seals – with barrier fluid (Plan 53A or 53B). Seal never contacts volatile process fluid directly.
Explosion proof: Ex d IIB T6, anti‑static grounding, full containment.
Materials: Stainless steel wetted parts (316L, duplex) – corrosion resistant to light hydrocarbons.
Four Pump Types – Ultimate Division (Memory Aid)
| Pump Type | Service | Examples |
|---|---|---|
| OH2 | Ambient to medium temp, clean light/medium oils | Gasoline, diesel, kerosene, naphtha, crude oil (ambient), aromatics, solvents |
| BB2 | High temperature heavy oils | Residue, VGO, slurry, hydrocracker feed, tower bottoms (220‑420°C) |
| BB3 | Ultra‑high pressure clean fluids | High pressure boiler feed, high pressure water injection |
| VS6 | Saturated volatile light ends, cavitation‑prone LPG/condensate | LPG, condensate, light naphtha, gasoline, tower overhead reflux |
One Sentence Summary
Saturated volatile light hydrocarbons, LPG, condensate, low NPSH available, afraid of cavitation → always choose API 610 VS6 vertical suspended barrel pump.
For complete technical datasheets, sizing assistance, or a quotation for any API 610 VS6 vertical barrel pump (LPG, condensate, light naphtha, gasoline, tower overheads), please contact info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.