The Sulzer SJS series is a vertically suspended, submersible motor-driven pump designed to API 610 Type VS6 (Vertical Suspended Type 6) standards. It is specifically engineered for firewater lift and seawater intake duties on offshore platforms (jack-up, semi-submersible), FPSO vessels, and other marine applications where space is constrained and no above-grade driver installation is possible.
Key Features:
VS6 Configuration: The pump and submersible motor are directly coupled and fully immersed in the pumped liquid. No long intermediate shaft, no above-water motor support – significantly reduces topside footprint and eliminates shaft alignment issues.
Compact Hydraulic Design: Single or multistage impellers in a single casing. Liquid enters from the bottom and is discharged through the top. Ideal for sea chests, caissons, or deep tanks.
Submersible Motor Protection: The motor is equipped with a watertight sealing system and high-pressure cable entry glands. Optional winding temperature sensors and moisture detectors ensure safe continuous operation underwater.
Corrosion-Resistant Materials: Wetted parts (impellers, diffusers, casing) available in duplex stainless steel, super duplex, or nickel-aluminum bronze for reliable seawater service.
Low NPSH Performance: Optimised suction design allows operation with limited submergence – critical for sea chest applications during vessel motion.
Compliance: Certified to NFPA 20, DNV/ABS, and API 610 (ISO 13709). Available with hazardous area approvals for explosive environments.
Typical Applications:
Offshore platform firewater sea lift pumps
FPSO fire main intake from sea chests
Floating production units (FPU) deluge systems
Onshore deep tank or reservoir fire pumps with space constraints
Why Choose SJS vs VS1 (JTS)?
No long shaft → eliminates intermediate bearings and shaft vibration issues
Smaller footprint → no above-deck motor or coupling guard needed
Simpler installation → drop into sea chest, connect cable, and run
Lower maintenance → entire assembly retrievable without pipe column disassembly
For complete technical datasheets (SJS400, SJS600, SJS800, SJS1000), sizing assistance, or a quotation, please contact info@hyrig.com. Our response time is within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.