API 610 BB2 Hydrocracker Feed Pump – Between Bearing Radial Split for High Pressure VGO & Heavy Oil Feed

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 BB2 hydrocracker feed pump – mandatory between bearing, radial split pump for high pressure hydrocracker and VGO feed services. Handles vacuum gas oil, coker gas oil, heavy diesel at 240‑390°C, high pressure, high viscosity, sour service (NACE MR0175). Features steam jacketing, API 682 dual mechanical seals (Plan 53B/54), forced lubrication with cooling. OH2 not permitted. Flow up to 4000 m³/h. Contact info@hyrig.com
Conatct For Details
DetailReview(0)Additional

The API 610 BB2 hydrocracker feed pump is a between‑bearing, single‑stage, single‑suction, radially split horizontal centrifugal pump. It is the mandatory pump type for high pressure hydrocracker and hydrotreater feed services. Overhung OH2 pumps are strictly prohibited for these severe applications due to insufficient shaft rigidity, high temperature deflection, and inability to handle high axial thrust and system pressure.

Why BB2 is Mandatory for Hydrocracker Feed

  • Between bearing support – impeller located between two bearings. Extremely rigid shaft, minimal thermal deflection, low vibration even at 390°C and high pressure.

  • Radially split casing – uniform thermal expansion, no distortion, handles high nozzle loads.

  • High pressure capacity – designed for Class 600/900/1500, suitable for reactor circuit pressures.

  • Jacketing capability – full steam jacketing prevents feed from solidifying and plugging during standby.

Applicable Media

  • Vacuum gas oil (VGO)

  • Coker gas oil (CGO)

  • Heavy diesel, heavy middle distillates

  • Mixed hydrocracker feed,裂化原料

  • Sour feeds containing H₂S, trace carbon residue, and fine coke particles

Operating Envelope

  • Temperature: 240 – 390°C

  • Pressure: High – Class 600, 900, or 1500 (typical discharge pressure 100‑200 bar)

  • Viscosity: Medium to high – solidifies upon cooling

  • Corrosion: Sour service – H₂S present

  • Solids: Trace coke fines, slight coking tendency

  • Operation: 24/7 continuous, heavy duty

Critical Design Features for Hydrocracker Feed BB2

  1. Casing – radially split, heat resistant alloy (WC9, C12A) with full steam jacketing. Prevents feed solidification and coking.

  2. Materials – NACE MR0175 compliant (sour service). Wetted parts: 12% chrome (CA6NM) or 316L for impeller, wear rings; C12A for casing.

  3. Sealing (API 682 mandatory) – dual mechanical seals (pressurised).

    • Preferred plans: Plan 53B (bladder accumulator) or Plan 54 (external barrier fluid circulation).

    • Barrier fluid is cooled and circulated – prevents coke build‑up on seal faces, eliminates high temperature seal failure.

  4. Bearing & lubrication – forced feed lubrication with oil cooler. Conducted heat from 390°C fluid is removed, ensuring long bearing life.

  5. Hydraulic design – low NPSH impeller (cavitation risk moderate for heavy gas oil), high efficiency for continuous duty.

Comparison – OH2 vs. BB2 for Hydrocracker Feed

FeatureOH2 (Overhung)BB2 (Between Bearing)
Suitability for hydrocracker feedNot permittedMandatory
Shaft rigidityLow – overhang, deflection under high pressureVery high – impeller between bearings
High temperature vibrationHigh riskLow, stable
Axial thrust capacityInadequate for high differential pressureExcellent – balanced design
System pressure ratingLimitedClass 900/1500 capable
JacketingNot typicalFull steam jacketing
Sour service NACEMay be offered but insufficientStandard, with proper materials

Why Refineries Choose BB2 for Hydrocracker Feed

  • Absolute reliability – between bearing construction eliminates the vibration and deflection that cause premature seal and bearing failure in OH2 pumps at high pressure and temperature.

  • Sour service ready – fully NACE MR0175 compliant, resistant to H₂S cracking.

  • Coking prevention – steam jacketing plus dual barrier fluid seals keep the pump clean and operable.

  • High pressure integrity – radially split casing and heavy wall flanges (Class 900/1500) contain full reactor circuit pressure.

Standards & Compliance

  • API 610 (12th Edition) – BB2 type

  • API 682 – dual mechanical seals, Plan 53B or 54

  • NACE MR0175 / ISO 15156 (sour service)

  • ASME B16.5 (Class 600/900/1500 flanges)

For complete technical datasheets, sizing assistance, or a quotation for any API 610 BB2 hydrocracker feed pump (VGO, coker gas oil, heavy diesel), please contact info@hyrig.com. We respond within 24 hours.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit