API 610 Boosting Pumps for Oil Shipping – Tankers, Chemical & LNG Carriers – Complete Selection Guide

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Boosting in oil shipping compensates line pressure losses, delivers required process pressure, and fits tight shipboard spaces. API 610 offers four optimized types: BB3 multistage for high‑pressure cargo/chemical/LNG boost (20‑200 bar gain), VS6 vertical can for in‑tank compact boost (5‑50 bar gain), OH2 overhung for auxiliary fuel/fire boost, and BB2 double‑suction for large‑flow ballast/scrub boost (5‑20 bar gain). Includes anti‑slosh design, API 682 seals, Ex d II BT4, and IMO/SOLAS compliance. Contact info@hyrig.com

Conatct For Details
DetailReview(0)Additional

In oil shipping, boosting refers to increasing pump discharge pressure to compensate for pipeline friction losses, elevation changes, filter pressure drops, or to meet specific process pressure requirements (e.g., long‑distance shore transfer, high‑pressure washing, chemical injection). Boosting pumps must address unique maritime challenges:

  • Precise pressure gain – typically 5–200 bar additional head without pressure spikes

  • Compact installation – no extra deck space; fit into cargo tanks, pump rooms, or machinery spaces

  • Slosh and motion resistance – vessel roll (±30°) and pitch (±15°)

  • Explosion‑proof construction – Ex d II BT4 or higher for flammable cargo

  • Reliable sealing – API 682 mechanical seals, leakage ≤10 ml/h

  • Compliance – IMO MARPOL, SOLAS, OCIMF, and API 610 12th Edition

Below are the four API 610 pump types most suitable for oil shipping boosting duties, ranked by application.


1. BB3 (Between Bearing Type 3) – Axially Split Multistage – Primary High‑Pressure Booster

Structural Definition (API 610 12th Edition)
Horizontal, axially split casing, multiple impellers in opposed arrangement. Bearings at both ends. Rigid shaft design (Shaft Flexibility Index SFI ≤1.0). Designed for continuous medium to high pressure boosting.

Boosting Adaptability

  • Key Advantages:

    • Multistage impellers provide precise pressure gain (adjustable within ±1 bar) – ideal for long‑distance cargo transfer (tank‑to‑tank or ship‑to‑shore) to overcome pipeline friction.

    • Opposed impeller design balances axial thrust – vibration ≤2.5 mm/s, resistant to vessel roll (±30°).

    • Axially split casing allows quick deck‑level inspection without disturbing piping.

    • Meets API 610 3‑year continuous run requirement.

    • Wetted parts in Hastelloy C276 / super duplex – resistant to crude, sour products, and chemicals.

  • Scenarios: Crude oil long‑distance boosting (e.g., tanker → shore tank, pressure gain 30–80 bar); chemical carrier toxic media boosting to 100–200 bar; LNG carrier cryogenic boost (–196°C) for pre‑cooling circuits; high‑pressure tank washing (40–80 bar).

  • Representative Models: Sulzer MSD‑XP series, PumpWorks BB3‑XT high‑pressure booster.

  • Key Parameters: Flow 50–3200 m³/h, Pressure gain 20–200 bar (inlet 10–50 bar → outlet 30–250 bar), Design pressure ≤250 bar, Temperature –196 to 150°C, Explosion‑proof Ex d II BT4.


2. VS6 (Vertically Suspended Type 6) – Vertical Can / Submersible – Compact In‑Tank Booster

Structural Definition (API 610 12th Edition)
Vertically suspended, motor and pump directly coupled (or short shaft). Single or multistage can‑type casing. Pump cartridge submerged inside cargo or ballast tank. No long intermediate shaft.

Boosting Adaptability

  • Key Advantages:

    • Vertical footprint only 1/3 of horizontal pump – installs through tank hatch, no additional deck space.

    • Full submergence provides excellent slosh resistance – stable boosting under pitch ±15° and roll ±30°.

    • API 682 mechanical seal leakage ≤10 ml/h – safe for flammable cargo.

    • Ideal for low suction pressure boosting (e.g., bottom cargo stripping).

  • Scenarios: Cargo tank bottom oil boosting (inlet 5–10 bar → outlet 20–30 bar); ballast water system differential pressure compensation (compensating filter pressure loss 5–15 bar); small tanker emergency boosting.

  • Representative Models: Sulzer TTMC‑B series (booster version), Ebara VS6 vertical can booster.

  • Key Parameters: Flow 100–5000 m³/h, Pressure gain 5–50 bar, Design pressure ≤100 bar, Temperature –20 to 120°C, Wetted parts 316L SS / Monel.


3. OH2 (Overhung Type 2) – Horizontal Overhung Centreline Support – Auxiliary System Booster

Structural Definition (API 610 12th Edition)
Horizontal, radially split volute, single‑stage end suction. Impeller overhung from bearing housing. Centreline support. Shaft deflection at seal ≤50 μm.

Boosting Adaptability

  • Key Advantages:

    • Compact, lightweight (single unit ≤500 kg) – fits tight machinery spaces for auxiliary systems.

    • Centreline support maintains alignment under vessel vibration and thermal changes – suitable for frequent start‑stop (emergency boosting).

    • Wide material selection – cast iron, bronze‑fitted, or 316SS – compatible with fuel oil, lube oil, fresh water, seawater.

    • Meets SOLAS fire pump requirements for emergency boosting.

  • Scenarios: Emergency firewater boosting (inlet 10–15 bar → outlet 25–36 bar, SOLAS compliant); fuel oil supply boosting (main engine pressure stabilisation); scrub water auxiliary boost (low pressure compensation).

  • Representative Models: Sulzer CPN‑B series, PumpWorks OH2 booster overhung pump.

  • Key Parameters: Flow 50–800 m³/h, Pressure gain 5–25 bar, Design pressure ≤36 bar, Temperature –10 to 100°C, IP67 protection.


4. BB2 (Between Bearing Type 2) – Radially Split Double‑Suction – Large‑Flow Low‑Pressure Booster

Structural Definition (API 610 12th Edition)
Horizontal, radially split volute, single‑stage double‑suction impeller. Impeller between two bearing sets. Low NPSH (NPSHr ≤3 m) – excellent cavitation resistance.

Boosting Adaptability

  • Key Advantages:

    • Double‑suction impeller covers very high flows (500–10,000 m³/h) – ideal for rapid ballast water exchange and scrub water circulation boost.

    • Pressure gain 5–20 bar – compensates pipeline friction and filter pressure drops without over‑pressuring components.

    • Radially split casing – easy maintenance on deck. Spiral wound gasket seals meet API 610 para 6.3.10 – zero leakage risk.

  • Scenarios: Large tanker ballast water system boost (inlet 2–5 bar → outlet 10–25 bar); port terminal cargo transfer boost; scrub water circulation low‑pressure boost.

  • Representative Models: Sulzer HSA‑B series, Cameron BB2 double‑suction booster.

  • Key Parameters: Flow 500–10,000 m³/h, Pressure gain 5–20 bar, Design pressure ≤40 bar, Temperature 0–80°C, Materials duplex SS or carbon steel with rubber lining.


Oil Shipping Boosting – API 610 Selection Decision Matrix

API 610 TypeCore Boosting ScenarioFlow RangePressure GainPressure Range (Inlet → Outlet)MaterialKey Boosting Advantage
BB3High‑pressure cargo / chemical / LNG boost50–3200 m³/h20–200 bar10–50 bar → 30–250 barHastelloy / cryo SSPrecise gain (±1 bar), stable under slosh, axial thrust balance
VS6In‑tank cargo boost, ballast differential boost100–5000 m³/h5–50 bar5–10 bar → 20–30 bar316L / MonelCompact vertical, submerged, no deck space, anti‑slosh
OH2Emergency fire boost, fuel oil supply boost50–800 m³/h5–25 bar10–15 bar → 25–36 barCast iron / SSSimple, frequent start‑stop, SOLAS compliant
BB2Large‑flow ballast boost, terminal cargo boost500–10000 m³/h5–20 bar2–5 bar → 10–25 barDuplex / rubber‑linedVery high flow, low NPSH, compensates filter losses

Boosting System Integration Principles (Closed Loop)

  • Precise pressure matching: Upstream pump (e.g., VS6 cargo pump, outlet 10–30 bar) → Booster pump (BB3/VS6) → Target pressure (30–250 bar). No additional pressure regulating valves needed – avoids leakage risks and complies with API 610 pressure accuracy requirements.

  • Space‑compatible installation:

    • In‑tank boosting → VS6 (submerged, no deck footprint).

    • Deck central boosting → BB2/BB3 (horizontal, shared baseplate with existing transfer pumps).

    • Auxiliary machinery space → OH2 (compact, lightweight).

  • Anti‑slosh & safety design:

    • All boosting pump impellers dynamically balanced (Grade G2.5).

    • Resilient mounts and built‑in vortex breakers for VS6/BB3 – prevents flow fluctuation during rolling.

    • Seals per API 682 (double mechanical seals for flammable media).

    • Explosion‑proof rating ≥Ex d II BT4.

  • Regulatory compliance:

    • API 610 12th Edition, ISO 13709.

    • IMO MARPOL (ballast water boost – must not exceed filter maximum transient pressure).

    • SOLAS (firewater boost – pressure and flow as per Chapter II‑2).

    • OCIMF guidelines for cargo transfer.


Typical Boosting Flow Examples

Large Crude Oil Tanker – Long‑Distance Shore Transfer:
Cargo tank suction (VS6 cargo pump, 10 bar) → In‑tank booster (VS6‑B, to 25 bar) → Deck high‑pressure booster (BB3, to 80 bar) → Shore tank reception

Chemical Carrier – High‑Pressure Toxic Media Transfer:
Chemical tank suction (VS6, 8 bar) → High‑pressure booster (BB3, to 180 bar) → Receiving facility

Large Tanker – Ballast Water Exchange (with UV/Filter):
Ballast tank drain (BB2, 2 bar) → Filter (pressure drop 8 bar) → Booster (BB2‑B, gain 10 bar → 12 bar outlet) → Overboard discharge (compensates line loss)

Emergency Fire Boosting (SOLAS):
Seachest / Fire pump (OH2, 12 bar) → Emergency booster (OH2‑B, gain 15 bar → 27 bar) → Fire monitors / sprinkler system (compliant 27 bar outlet)

For engineering assistance, detailed pump sizing, or a quotation for any API 610 oil shipping boosting pump (BB3, VS6, OH2, BB2), please contact info@hyrig.com. We respond within 24 hours.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit