The API 610 VS6 vertical suspended barrel pump is specifically designed for medium to high pressure services (Class 600/900) combined with saturated, easily vaporised light hydrocarbons. This configuration – double casing, multistage, pull‑out cartridge, dry pit installation – is the only reliable solution for applications where high pressure and low NPSH occur together.
Which Media & Operating Range
Media: LPG (propane, butane), condensate, saturated naphtha, high pressure hydrocarbon condensate, cryogenic or ambient temperature saturated light ends.
Pressure rating: Class 600 or 900 (medium to high pressure).
Temperature: –170°C to +180°C (covers LNG to hot condensate).
Fluid characteristics: Clean, low viscosity, high vapour pressure, saturated, prone to flashing.
Why Medium to High Pressure Requires VS6
Double casing barrel – the thick wall, pressure‑containing outer shell provides full integrity for Class 600/900 service, far surpassing single‑case horizontal pumps.
Multistage hydraulics – each stage adds pressure. Multistage impellers achieve the high heads (up to 1500+ metres) required for high pressure transfer, export, and loading, which single‑stage OH2 or BB2 cannot reach.
Ultra‑low NPSH – still mandatory – saturated light ends at high pressure are still at their vapor pressure. Any pressure drop causes flashing. The VS6 immersed suction and barrel pressurisation maintain the lowest possible NPSHr, eliminating cavitation and vapour lock.
Leak containment – vertical, fully enclosed construction minimises leakage risk for high pressure flammable gases/liquids. The top‑mounted seal operates in a clean barrier fluid environment, not exposed to high pressure saturated vapour.
Key Design Features for Medium‑High Pressure VS6
High pressure rating flanges (Class 600/900) and thick wall barrel casing.
Axial thrust balancing device (opposed impellers or balance drum) – essential for high differential pressure.
API 682 dual mechanical seals with Plan 53A or 54 (pressurised barrier fluid).
High strength materials – stainless steel or alloy steel for pressure containment.
Explosion‑proof Ex d IIB T6, anti‑static.
Final Four Pump Types – Pressure & Media Division
| Pump Type | Pressure Range | Service | Media Examples |
|---|---|---|---|
| OH2 | Low to medium | Ambient to medium temp light/medium oils | Gasoline, diesel, kerosene, naphtha, aromatics, ambient crude |
| BB2 | Medium (Class 300) | High temperature heavy oils | Residue, VGO, slurry, hydrocracker feed, tower bottoms (220‑420°C) |
| BB3 | Ultra‑high (≥Class 900) | Clean high pressure water | High pressure boiler feedwater, high pressure water injection |
| VS6 | Medium to high (Class 600/900) + low NPSH | Saturated light ends, volatile hydrocarbons, cryogenic | LPG, LNG, condensate, saturated naphtha, high pressure condensate |
One Sentence Summary
Ultra‑high pressure → BB3. Medium to high pressure with saturated, volatile light ends → VS6. High temperature heavy oil → BB2. Ambient clean light oil → OH2.
For complete technical datasheets, sizing assistance, or a quotation for any API 610 VS6 high pressure pump, please contact info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.