| Type | OD (mm) | Connection | Fishing Range (mm) |
|---|---|---|---|
| DLT-T60 | 105 | NC26 | 59.7 - 61.3 |
| DLT-T89 | 134 | NC38 | 88.0 - 91.0 |
| DLT-T102 | 145 | NC38 | 101.0 - 104.0 |
| DLT-T140 | 200 | NC50 | 139.0 - 142.0 |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the overshot body. |
| Fishing Range | The outside diameter range of the fish that the slips can engage. |
| Overall Length | Varies by model; confirm against wellbore conditions. |
The back-off overshot is designed to grip the outside of the fish and transmit left-hand torque. It is used when a string is stuck and needs to be backed off at a specific joint. The overshot is run in, engaged over the fish, and left-hand torque is applied to unscrew the connection above the overshot.
Looking to replace a back-off overshot?
Send the fish OD, connection, and required torque; HYRIG will confirm the matching back-off overshot.
Q1: What is the main advantage of a back-off overshot?
It combines external fishing and left-hand torque transmission, allowing you to grip the fish and back off the string in one operation.
Q2: How do I choose the right size?
Measure the outside diameter of the fish and match it to the overshot's fishing range.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For back-off overshot selection, contact HYRIG: info@hyrig.com
Please include: fish OD, connection, torque requirement, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.