| Type | Upper Connection | Lower Connection | Application |
|---|---|---|---|
| Kelly Joint | Kelly | Drill pipe joint | Type A or B |
| Drill Pipe Joint | Drill pipe joint | Drill pipe joint | Type A or B |
| Crossover Joint | Kelly | Drill collar | Type A or B |
| Drill Collar Joint | Drill collar | Drill collar | Type A or B |
| Bit Joint | Drill collar | Bit | Type A or B |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the sub. |
| ID | Inner diameter for fluid flow. |
| Length | Overall length of the sub; confirm against BHA drawing. |
The cross-over sub is machined from a single piece of steel with different thread types on each end. It is used to connect components with different threads, such as a kelly to a drill pipe or a drill collar to a bit. The sub must be selected based on the specific thread types and the required load capacity.
Looking to replace a cross-over sub?
Send the upper and lower connection types, along with the required load rating; HYRIG will confirm the matching cross-over sub.
Q1: What is the purpose of a cross-over sub?
It is used to connect components with different thread types in the drill string.
Q2: How do I choose the right cross-over sub?
Identify the thread type of the upper and lower connections and ensure the sub meets the load requirements.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For cross-over sub selection, contact HYRIG: info@hyrig.com
Please include: upper connection, lower connection, load requirements, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.