| Type | Function | Typical Size Range | Connection |
|---|---|---|---|
| Cross-over Sub | Thread transition | All sizes | NC26 - 7 5/8 REG |
| Integral Lifting Sub | Lifting drill string | 2 7/8 in to 10 in | NC23 - NC77 |
| Short Drill Pipe | Adjusting string length | 2 3/8 in to 5 1/2 in | NC26 - NC50 |
| Two-way Shock Absorber | Vibration absorption | 6 1/4 in to 9 1/32 in | NC46 - 7 5/8 REG |
| Safety Joint | Emergency release | 3 3/8 in to 9 in | NC26 - 7 5/8 REG |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the sub or tool. |
| ID | Inner diameter for fluid flow. |
| Connection | Thread type for connecting to the drill string. |
Subs and shock tools serve various functions in the drill string. Cross-over subs connect different thread types, lifting subs provide a safe lifting point, and short drill pipes adjust the length of the string. Two-way shock absorbers use springs or elastomers to absorb axial and torsional vibration, while safety joints provide a reliable release point if the string becomes stuck.
Looking to replace a sub or shock tool?
Send the connection size, application, and load requirements; HYRIG will confirm the matching sub or shock tool.
Q1: What is the difference between a cross-over sub and a safety joint?
A cross-over sub connects different thread types, while a safety joint is designed to be easily released if the string becomes stuck.
Q2: How do I choose the right shock absorber?
Match the shock absorber to your drill string size and the type of vibration you need to absorb.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For subs and shock tools selection, contact HYRIG: info@hyrig.com
Please include: connection type, application, load requirements, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.