| Type | Working Pressure (MPa) | Typical OD (mm) | Connection |
|---|---|---|---|
| Upper Kelly Cock | 35-70 | 146 - 200 | 4 1/2 REG - 6 5/8 REG |
| Lower Kelly Cock | 35-70 | 105 - 188 | NC31 - NC56 |
| Arrow Float Valve | N/A | 89 - 241 | NC26 - 7 5/8 REG |
| Inside BOP | N/A | 89 - 241 | 2 3/8 IF - 7 5/8 REG |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the valve body. |
| Water Hole | Inner diameter for fluid flow. |
| Connection | Thread type for connecting to the drill string. |
Valves and float equipment are essential for well control. Kelly cock valves are manually operated to open or close the drill string. Float valves are check valves that allow fluid to flow down but prevent backflow, protecting the bit nozzles and preventing well kicks from entering the drill string.
Looking to replace a valve?
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Send the connection size, pressure requirement, and application; HYRIG will confirm the matching valve or float equipment.
Q1: What is the difference between an upper and lower kelly cock valve?
The upper kelly cock is installed between the swivel and the kelly, while the lower kelly cock is installed between the kelly and the drill pipe.
Q2: How do I choose the right float valve?
Match the float valve OD and connection to your drill string and ensure the water hole provides sufficient flow area.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For valves and float equipment selection, contact HYRIG: info@hyrig.com
Please include: connection, pressure rating, operation type, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.