Arrow Float Valve | Mud Backflow Prevention, NC to REG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the arrow float valve range. The arrow float valve is a check valve installed above the bit to prevent mud and cuttings from flowing back into the drill string, and can serve as an inner blowout preventer.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Application: Prevents mud backflow, serves as inner BOP
  • Connection Range: NC26 to 7 5/8 REG
  • Float Valve OD: 48 mm to 121 mm
  • Design: Arrow-shaped flapper or plunger
  • Water Hole: 32 mm to 76 mm

Key Specifications

TypeFloat Valve OD (mm)Water Hole (mm)Connection
FFJ118948.432NC26
FFJ110861.6383 1/2 REG
FFJ112779.4513 1/2 IF
FFJ1203121.4766 5/8 REG

Data source: Technical data table.

Dimensions

ItemDescription
Float Valve ODOuter diameter of the float valve assembly.
Water HoleInner diameter for fluid flow.
ConnectionThread type for connecting to the drill string.

Structure / Working Principle

The arrow float valve uses a flapper or plunger mechanism to allow drilling fluid to flow down through the drill string but prevent it from flowing back up. When the pump is stopped, the valve closes, preventing mud, sand, and cuttings from entering the drill string and blocking the bit nozzles. It also acts as a barrier against well kicks.

Cross-Reference & Replacement

Looking to replace an arrow float valve?

  1. Confirm Connection - Match the thread type to your drill string.
  2. Confirm Float Valve OD - Ensure clearance and flow area.
  3. Confirm Water Hole - Match the flow area to your drilling requirements.

Applications

  • Preventing bit nozzle blockage: Stops mud and cuttings from flowing back during connections.
  • Well kick control: Acts as an inner blowout preventer.
  • Improving rig floor environment: Prevents mud from splashing onto the drill floor.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Send the connection, required float valve OD, and water hole size; HYRIG will confirm the matching arrow float valve.

Frequently Asked Questions

Q1: What is the function of an arrow float valve?
It prevents mud and cuttings from flowing back into the drill string and acts as an inner blowout preventer.

Q2: How do I choose the right size?
Match the connection to your drill string and ensure the float valve OD and water hole meet your flow requirements.

Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.

Contact

For arrow float valve selection, contact HYRIG: info@hyrig.com

Please include: connection, float valve OD, water hole requirement, and quantity.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit