| Type | OD x Length (mm) | Fishing Range (mm) | Connection |
|---|---|---|---|
| DLM-T48 | 89 x 600 | 39.7 - 41.9 | NC26 |
| DLM-T89 | 114 x 750 | 75.4 - 91.0 | NC38 |
| DLM-T140 | 160 x 850 | 117.7 - 127.7 | NC50 |
| DLM-T219 | 220 x 950 | 195.1 - 203.1 | 5 1/2 FH |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD x Length | Overall dimensions of the spear body. |
| Fishing Range | The internal diameter range of the fish that the slips can engage. |
| Internal Diameter (ID) | The bore size for fluid circulation. |
The back-off spear is designed with a slip mechanism that grips the inside of the fish and transmits left-hand torque. It is used when a string is stuck and needs to be backed off at a specific joint. The spear is run in, engaged, and left-hand torque is applied to unscrew the connection above the spear.
Looking to replace a back-off spear?
Send the fish ID, connection, and required torque; HYRIG will confirm the matching back-off spear.
Q1: What is the main advantage of a back-off spear?
It combines fishing and left-hand torque transmission, allowing you to grip the fish and back off the string in one operation.
Q2: How do I choose the right size?
Measure the internal diameter of the fish and match it to the spear's fishing range.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For back-off spear selection, contact HYRIG: info@hyrig.com
Please include: fish ID, connection, torque requirement, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.