| Type | Function | Typical Size Range | Connection |
|---|---|---|---|
| Mechanical Internal Cutter | Cutting from inside | 2 3/8 in to 20 in | NC26 - 6 5/8 REG |
| Hydraulic Internal Cutter | Cutting from inside | 5 1/2 in to 13 3/8 in | 2 7/8 REG - NC50 |
| External Cutter | Cutting from outside | 2 1/4 in to 8 1/8 in | 2 3/8 TBG - 6 5/8 REG |
| Washover Pipe | Washover stuck tools | 4 3/4 in to 17 1/2 in | Buttress thread |
Data source: Technical data table.
| Item | Description |
|---|---|
| Cutter OD | Outer diameter of the cutter body. |
| Cutting Range | The pipe size range the cutter can cut. |
| Washover OD | Outer diameter of the washover pipe. |
Internal cutters are run inside the pipe and use mechanical or hydraulic force to extend blades and cut the pipe wall. External cutters are run outside the pipe and cut from the outside. Washover pipe is a large-diameter pipe with a cutting shoe that is rotated over a stuck tool to clear debris and free it.
Looking to replace a cutter or washover tool?
Send the pipe size, stuck situation, and connection; HYRIG will confirm the matching cutter or washover tool.
Q1: What is the difference between mechanical and hydraulic internal cutters?
Mechanical cutters are activated by rotation and weight, while hydraulic cutters are activated by mud pressure.
Q2: How do I choose the right cutter size?
Match the cutter's cutting range to the pipe size you need to cut.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For cutter and washover tool selection, contact HYRIG: info@hyrig.com
Please include: pipe size, operation type, connection, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.