| Tool Type | Function | Typical Size Range | Connection |
|---|---|---|---|
| Flat Bottom Mill | Grinding small objects | 3 1/2 in to 15 in | 2 3/8 REG - 6 5/8 REG |
| Pilot Mill | Grinding hollow objects | 5 1/8 in to 15 in | 2 7/8 REG - 6 5/8 REG |
| Tapered Mill | Casing deformation | 3 1/2 in to 15 in | 2 3/8 REG - 6 5/8 REG |
| Internal Cutter | Cutting from inside | 4 in to 20 in | NC26 - 6 5/8 REG |
| External Cutter | Cutting from outside | 2 1/4 in to 8 1/8 in | 2 3/8 TBG - 6 5/8 REG |
Data source: Technical data table.
| Item | Description |
|---|---|
| Outer Diameter (OD) | Determines the hole size or pipe size the tool can operate in. |
| Blade Length | Length of the cutting or milling blades. |
| Overall Length | Total length of the tool; confirm clearance in the wellbore. |
Milling tools use hardened blades or inserts to grind metal objects in the wellbore. Flat bottom mills are used for general junk, while pilot mills and tapered mills are designed for specific shapes. Cutting tools use mechanical or hydraulic activation to extend blades and cut the pipe wall from the inside or outside.
Looking to replace a milling or cutting tool?
Send the hole size, fish type, and connection requirements; HYRIG will confirm the matching milling or cutting tool.
Q1: What is the difference between a mill and a cutter?
A mill grinds metal into small pieces, while a cutter slices the pipe to separate it.
Q2: How do I choose the right mill for my fish?
Match the mill type (flat, concave, pilot, or tapered) to the shape of the fish and the hole size.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For milling and cutting tool selection, contact HYRIG: info@hyrig.com
Please include: hole size, fish type, connection, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.