| Type | OD (mm) | Water Hole (mm) | Connection | Working Pressure (MPa) |
|---|---|---|---|---|
| CS146 | 146 | 54 | 4 1/2 REG-LH | 35-70 |
| CS200 | 200 | 75 | 6 5/8 REG-LH | 35-70 |
| XS105 | 105 | 40 | NC31 | 35-70 |
| XS165 | 165 | 61 | NC46 | 35-70 |
| XS188 | 187 | 76 | NC56 | 35-70 |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the valve body. |
| Water Hole | Inner diameter for fluid flow. |
| Connection | Thread type for connecting to the drill string. |
The kelly cock valve uses a ball valve mechanism operated by a manual handle. Turning the handle 90 degrees opens or closes the valve. The upper kelly cock is installed between the swivel and the top of the kelly, while the lower kelly cock is installed between the bottom of the kelly and the drill pipe. It is a critical well control tool for preventing blowouts.
Looking to replace a kelly cock valve?
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Send the connection size, pressure requirement, and position (upper/lower); HYRIG will confirm the matching kelly cock valve.
Q1: What is the difference between an upper and lower kelly cock valve?
The upper kelly cock is installed between the swivel and the kelly, while the lower kelly cock is installed between the kelly and the drill pipe.
Q2: How is the kelly cock valve operated?
It is operated manually by turning the handle 90 degrees.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For kelly cock valve selection, contact HYRIG: info@hyrig.com
Please include: connection, pressure rating, position (upper/lower), and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.