| Type | Function | Typical Size Range | Key Feature |
|---|---|---|---|
| Kelly Cock Valve | Manual well control | 4 1/8 in to 7 7/8 in | 35-70 MPa working pressure |
| Arrow Float Valve | Prevents mud backflow | 2 7/8 in to 7 5/8 in | Flapper or plunger design |
| Cross-over Sub | Thread transition | All sizes | A, B, and C type configurations |
| Safety Joint | Planned release point | 3 3/8 in to 9 in | H-type and AJ-type |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the tool. |
| ID | Inner diameter for fluid flow. |
| Connection | Thread type for connecting to the drill string. |
Kelly cock valves are manually operated ball valves installed above or below the kelly to control wellbore fluids. Arrow float valves are check valves that allow fluid to flow down but prevent backflow. Cross-over subs connect different thread types, while safety joints are designed to be easily backed off if the string becomes stuck.
Looking to replace a valve or sub?
Send the connection size, pressure requirement, and application; HYRIG will confirm the matching valve or sub.
Q1: What is the difference between a kelly cock valve and a float valve?
A kelly cock valve is a manual ball valve for well control, while a float valve is an automatic check valve that prevents backflow.
Q2: How do I choose the right cross-over sub?
Identify the thread type of the upper and lower connections and match the sub to those threads.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For valves and subs selection, contact HYRIG: info@hyrig.com
Please include: connection type, pressure rating, application, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.