| Type | Application | Typical OD Range | Connection |
|---|---|---|---|
| Flat Bottom Mill | Grinding small fallen objects | 89 mm to 381 mm | 2 3/8 REG - 6 5/8 REG |
| Concave Bottom Mill | Unstable fallen objects | 89 mm to 381 mm | 2 3/8 REG - 6 5/8 REG |
| Pilot Mill | Hollow objects | 130 mm to 381 mm | 2 7/8 REG - 6 5/8 REG |
| Tapered Mill | Casing deformation | 89 mm to 381 mm | 2 3/8 REG - 6 5/8 REG |
| Mill Shoe | Fish top repair | 114 mm to 340 mm | 3 1/2 REG - 6 5/8 REG |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the mill or shoe. |
| Blade Length | Length of the cutting structure. |
| Connection | Thread type for connecting to the drill string. |
Mills use hardened cutting structures to grind metal. Flat bottom mills are for general junk, concave mills are for unstable objects, and pilot mills have a central guide to engage hollow fish. Mill shoes are used to repair the top of a fish so that an overshot or spear can engage it.
Looking to replace a mill?
Send the fish type, hole size, and connection; HYRIG will confirm the matching mill or shoe.
Q1: What is a pilot mill used for?
It is used to grind hollow objects or fish with an internal bore, as the pilot guides the mill into the hole.
Q2: How do I choose between flat and concave mills?
Use flat bottom for stable objects and concave bottom for unstable or irregularly shaped objects.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For mill and shoe selection, contact HYRIG: info@hyrig.com
Please include: fish type, hole size, connection, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.