| Type | OD (mm) | Spiral Slip Max (mm) | Basket Slip Max (mm) | Connection |
|---|---|---|---|---|
| TL-T114 | 114 | 89 | 78 | NC31 |
| TL-T152 | 152 | 121 | 108 | NC38 |
| TL-T168 | 168 | 127 | 114.3 | NC50 |
| TL-T245 | 245 | 203 | 185 | 6 5/8 REG |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the overshot body. |
| Max Fishing Size | The maximum outside diameter of the fish that the slips can engage. |
| Overall Length | Varies by model; confirm against wellbore conditions. |
The releasing overshot is run into the wellbore and guided over the outside diameter of the fish. The spiral or basket slips engage the outside of the pipe to grip it. If the fish cannot be pulled, the overshot can be released by applying right-hand torque or a specified mechanical action, allowing the fishing string to be retrieved.
Looking to replace a releasing overshot?
Send the fish OD, connection, and wellbore conditions; HYRIG will confirm the matching releasing overshot.
Q1: How does a releasing overshot work?
It guides over the outside of the fish and uses slips to grip it, and can be released if the fish cannot be pulled.
Q2: What is the difference between spiral slip and basket slip?
Spiral slips are typically used for larger fish sizes, while basket slips are used for smaller sizes and can provide better engagement.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For releasing overshot selection, contact HYRIG: info@hyrig.com
Please include: fish OD, connection, required accessories, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.