| Type | Key Feature | Typical Application |
|---|---|---|
| Integral Stabilizer | Single-body machined | General drilling, deviation control |
| Replaceable Sleeve | Replaceable wear sleeve | Directional wells, cost-effective maintenance |
| Non-Rotating | Protects casing from wear | Cased hole intervals |
| BDW Tapered | Variable diameter | Hole contraction, stuck pipe prevention |
| Float Valve | Integrated float valve | Mud backflow prevention, well control |
Data source: Technical data table.
| Item | Description |
|---|---|
| Working OD | Measured across the blade crest; determines hole contact. |
| Static OD | Reduced diameter during tripping (specific to BDW type). |
| Connection | Matched to the drill string; confirm top and bottom separately. |
Stabilizers maintain the drill string in the center of the borehole. Integral stabilizers are machined from a single body, while replaceable sleeve types allow the wear sleeve to be changed. Non-rotating stabilizers protect the casing, and BDW tapered stabilizers reduce their diameter during tripping to prevent stuck pipe.
Looking for the right stabilizer?
Send the bit size, connection, and well trajectory; HYRIG will confirm the matching stabilizer type.
Q1: Which stabilizer is best for directional wells?
Replaceable sleeve and integral spiral stabilizers are commonly used in directional wells for deviation control.
Q2: How do I prevent stuck pipe in contracted holes?
BDW tapered stabilizers reduce their working diameter during tripping to prevent stuck pipe.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For stabilizer selection, contact HYRIG: info@hyrig.com
Please include: bit size, connection, application, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.