Float Valve Stabilizer | Mud Backflow Prevention, 35-70 MPa

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the float valve stabilizer range. The float valve stabilizer is a downhole tool that integrates a float valve to prevent mud and cuttings from flowing back into the drill string during connections, serving as an inner blowout preventer during well kicks.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Max Sealing Pressure: 35-70 MPa
  • Float Valve OD: 75 mm to 110 mm
  • Water Hole: 40 mm to 76 mm
  • Connection: 2 3/8 IF to 7 5/8 REG
  • Function: Prevents mud backflow, serves as inner BOP

Key Specifications

TypeConnectionFloat Valve OD mm (in)Water Hole mm (in)Max Sealing Pressure MPa
FWL1522 3/8 IF75 (2 15/16)40 (1 9/16)35-70
FWL2144 IF88 (3 1/2)50 (2)35-70
FWL3106 5/8 REG110 (4 5/16)76 (3)35-70
FWL4447 5/8 REG110 (4 5/16)76 (3)35-70

Data source: Technical data table.

Dimensions

ItemDescription
Float Valve ODOuter diameter of the integrated float valve assembly.
Water HoleInner diameter for drilling fluid flow.
Overall LengthConfirm against BHA drawing for spacing.

Structure / Working Principle

The float valve stabilizer combines a stabilizer body with an integrated float valve. During drilling, it stabilizes the drill string. When making connections or stopping the pump, the float valve closes to prevent mud, sand, and cuttings from flowing back into the drill string and blocking the bit nozzles. During a well kick, it acts as an inner blowout preventer, preventing formation fluids from entering the drill string.

Cross-Reference & Replacement

Looking to replace a float valve stabilizer?

  1. Confirm Connection - Match the drill string thread (2 3/8 IF, 4 IF, 6 5/8 REG, 7 5/8 REG).
  2. Confirm Float Valve OD - Ensure clearance and flow area.
  3. Confirm Sealing Pressure - Verify the pressure rating matches your well conditions.

Applications

  • Preventing bit nozzle blockage: Stops mud and cuttings from flowing back during connections.
  • Well kick control: Acts as an inner blowout preventer to stop formation fluid entry.
  • Improving rig floor environment: Prevents mud from splashing onto the drill floor during tripping.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Send the connection, required float valve OD, and well pressure conditions; HYRIG will confirm the matching float valve stabilizer.

Frequently Asked Questions

Q1: What is the function of the float valve in this stabilizer?
It prevents mud and cuttings from flowing back into the drill string and acts as an inner blowout preventer during well kicks.

Q2: How do I choose the right size?
Match the connection to your drill string and ensure the float valve OD provides sufficient flow area.

Q3: What is the lead time?
Standard sizes are typically 25-35 days after confirmation.

Contact

For float valve stabilizer selection, contact HYRIG: info@hyrig.com

Please include: connection, float valve OD, water hole requirement, working pressure, and quantity.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit