BDW Tapered Stabilizer | 12 1/4 to 6 in, Variable Diameter

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BDW tapered stabilizer range. The BDW tapered stabilizer is a variable-diameter downhole tool that reduces its working diameter during tripping to prevent stuck pipe caused by hole contraction, and provides operating space for washover operations.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Working Diameter: 152 mm to 311 mm
  • Static Diameter: 140 mm to 285 mm
  • Max Tension: 850 kN to 2000 kN
  • Max Torsion: 25 kNm to 45 kNm
  • Application: Hole contraction, stuck pipe prevention
  • Connection: NC38 to 6 5/8 REG

Key Specifications

TypeConnectionMax Working Diameter mm (in)Static Diameter mm (in)Max Tension kNMax Torsion kNm
BDW3116 5/8 REG311 (12 1/4)285 (11 1/4)200045
BDW245NC56245 (9 5/8)220 (8 5/8)170042
BDW216NC50216 (8 1/2)200 (7 7/8)150038
BDW165NC40165 (6 1/2)151 (5 15/16)110030
BDW152NC38152 (6)140 (5 1/2)85025

Data source: Technical data table. Custom sizes can be reviewed against specific well requirements.

Dimensions

ItemDescription
Working DiameterMaximum diameter during drilling; determines stabilization.
Static DiameterReduced diameter during tripping; used to calculate casing clearance.
Overall LengthConfirm against BHA drawing before ordering.

Structure / Working Principle

The BDW tapered stabilizer changes its working diameter through a tapered sleeve and sliding assembly. During drilling, it maintains the required working diameter for stabilization. During tripping, it returns to a smaller static diameter, reducing the risk of sticking in a contracted hole. The reduced diameter also leaves enough annular space for washover tools if another type of stuck pipe occurs.

Cross-Reference & Replacement

Looking to replace a stabilizer in a contracted hole?

  1. Confirm Working Diameter - Match the hole size and required stabilization.
  2. Confirm Static Diameter - Check clearance through casing or restrictions.
  3. Confirm Connection - NC38, NC40, NC50, NC56, or 6 5/8 REG.
  4. Confirm Tension and Torsion Rating - Compare with your drill string load and make-up torque.

Applications

  • Hole contraction intervals: Reduces working diameter during tripping to lower stuck pipe risk.
  • Washover preparation: Leaves annular space for washover tools if stuck pipe occurs.
  • Directional and horizontal wells: Supports stabilization while maintaining tripping clearance.

Selection Support

Send the hole size, working diameter, static diameter requirement, and connection; HYRIG will confirm the matching BDW model.

Frequently Asked Questions

Q1: What is the difference between working diameter and static diameter?
Working diameter is the maximum diameter during drilling; static diameter is the reduced diameter during tripping.

Q2: How do I choose the BDW size for my hole?
Match the working diameter to the hole size, then check static diameter clearance and connection.

Q3: What is the lead time?
Standard sizes are typically 25-35 days after drawing and connection confirmation.

Contact

For BDW tapered stabilizer selection, contact HYRIG: info@hyrig.com

Please include: hole size, working diameter, static diameter, connection, quantity, and destination port.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit