| Parameter | Range / Options |
|---|---|
| Bit size | 6 in to 26 in |
| Blade type | 3-blade spiral / 4-blade spiral / straight |
| Working surface | Hardfacing or inserts |
| Connection | NC38, NC46, NC50, 6 5/8 REG (varies by size) |
Data source: Technical data table.
| Item | Description |
|---|---|
| Working OD | Measured across the blade crest. |
| Body OD | Machined body diameter; varies by bit size. |
| Overall Length | Depends on bit size and connection; confirm against BHA drawing. |
The integral spiral blade stabilizer is machined from a single steel body. The spiral blades maintain wall contact while allowing drilling fluid to pass through the channels, which improves hole cleaning and reduces differential sticking in directional sections. Near-bit stabilizers provide immediate trajectory control, while string stabilizers maintain stabilization further up the drill string.
Looking to replace an integral stabilizer?
Send the bit size, connection, and formation type; HYRIG will confirm the matching integral stabilizer configuration and hardfacing option.
Q1: What is the difference between 3-blade and 4-blade spiral stabilizers?
3-blade designs offer more flow area for hole cleaning; 4-blade designs provide more wall contact for stabilization.
Q2: How do I choose the hardfacing material?
Tungsten carbide buttons are standard for abrasive formations; diamond compound is used for extreme wear conditions.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after drawing confirmation.
For integral spiral blade stabilizer selection, contact HYRIG: info@hyrig.com
Please include: bit size, connection, blade type, hardfacing requirement, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.