Key Factors in Stabilizer Selection
Selecting the right stabilizer involves several key decisions:
- Type - Integral, replaceable sleeve, non-rotating, or variable diameter.
- Position - Near-bit or string.
- Size - Working OD must match the hole size.
- Material - Hardfacing options for abrasive formations.
Comparing Stabilizer Types
- Integral Stabilizer: Best for general drilling, single-body construction for durability.
- Replaceable Sleeve: Best for directional wells where the sleeve can be replaced without changing the whole tool.
- Non-Rotating: Best for cased hole intervals to prevent casing wear.
- BDW Tapered: Best for hole contraction intervals to prevent stuck pipe.
Near-Bit vs String Stabilizer
- Near-Bit: Positioned directly above the bit for immediate trajectory control.
- String: Positioned higher in the drill string for broader stabilization.
Common Field Errors
- Selecting a working OD that is too large or too small for the hole.
- Forgetting to check the connection type against the BHA.
- Using a standard stabilizer in a cased hole interval where a non-rotating type is required.
Selection Support
Not sure which stabilizer type fits your BHA? Send the bit size, connection, and well trajectory; HYRIG will confirm the matching model.
Frequently Asked Questions
Q1: How do I measure a stabilizer?
Measure the working OD across the blade crest and confirm the connection type.
Q2: Can I use a near-bit stabilizer higher in the string?
Near-bit stabilizers are designed for specific positions; using them elsewhere may affect BHA performance.
Contact
For stabilizer selection support, contact HYRIG: info@hyrig.com
Related Pages