| Type | OD (mm) | Connection | Suitable Well Diameter (mm) |
|---|---|---|---|
| MP89 | 89 | 2 3/8 REG | 95.2 - 101.6 |
| MP140 | 140 | 3 1/2 REG | 155.6 - 165.1 |
| MP200 | 200 | 4 1/2 REG | 212.7 - 241.3 |
| MP257 | 257 | 6 5/8 REG | 273.0 - 295.3 |
| MP381 | 381 | 6 5/8 REG | 406.4 - 444.5 |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the mill body. |
| Overall Length | Varies by size; confirm clearance in the wellbore. |
The flat bottom mill has a flat cutting face with hardfacing or inserts. It is run into the wellbore and rotated to grind metal objects into small pieces that can be circulated out. It is typically used for general junk and fish top preparation.
Looking to replace a flat bottom mill?
Send the hole size, junk type, and connection; HYRIG will confirm the matching flat bottom mill.
Q1: What is a flat bottom mill used for?
It is used to grind small fallen objects and repair fish tops.
Q2: How do I choose the right size?
Match the mill OD to your hole size and ensure the connection matches your work string.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For flat bottom mill selection, contact HYRIG: info@hyrig.com
Please include: hole size, connection, junk type, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.