| Type | Model Example | Fishing Range (mm) | Connection |
|---|---|---|---|
| Releasing Spear | TLM102 | 84.8 - 99.1 | NC38 |
| Releasing Spear | TLM140 | 117.7 - 127.7 | NC50 |
| Back-off Spear | DLM-T89 | 75.4 - 91.0 | NC38 |
| Back-off Spear | DLM-T140 | 117.7 - 127.7 | NC50 |
Data source: Technical data table.
| Item | Description |
|---|---|
| Fishing Range | The internal diameter range of the fish that the spear can engage. |
| Overall Length | Varies by model; confirm against wellbore conditions. |
| Guide Cone OD | Outer diameter of the guide cone that enters the fish first. |
Fishing spears engage the internal bore of the fish. The releasing spear uses a slip mechanism to grip the inside of the pipe and can be released if the fish cannot be pulled. The back-off spear is used in conjunction with left-hand torque to back off a stuck string, combining fishing and torque transmission.
Looking to replace a fishing spear?
Send the fish ID, connection, and wellbore conditions; HYRIG will confirm the matching fishing spear.
Q1: What is the difference between a releasing spear and a back-off spear?
A releasing spear is for standard internal fishing and can be released; a back-off spear is designed to transmit left-hand torque for unscrewing a stuck string.
Q2: How do I choose the right spear size?
Measure the internal diameter of the fish and match it to the spear's fishing range.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For fishing spear selection, contact HYRIG: info@hyrig.com
Please include: fish ID, connection, operation type, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.