| Type | OD (mm) | Guide Cone OD (mm) | Fishing Range (mm) | Connection |
|---|---|---|---|---|
| TLM6086 | 86 | 44.5 | 46.1 - 50.7 | NC26 |
| TLM102 | 127 | 75 | 84.8 - 99.1 | NC38 |
| TLM140 | 159 | 102 | 117.7 - 127.7 | NC50 |
| TLM245 | 203 | 210 | 215.9 - 228.6 | 6 5/8 REG |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the spear body. |
| Guide Cone OD | The diameter of the guide cone that enters the fish. |
| Fishing Range | The internal diameter range of the fish that the slips can engage. |
The releasing spear is run into the wellbore and inserted into the internal bore of the fish. The slip mechanism expands to grip the inside of the pipe. If the fish cannot be pulled, the spear can be released by applying right-hand torque or a specified mechanical action, allowing the fishing string to be retrieved.
Looking to replace a releasing spear?
Send the fish ID, connection, and wellbore conditions; HYRIG will confirm the matching releasing spear.
Q1: How does a releasing spear work?
It engages the internal bore of the fish with slips and can be released if the fish cannot be pulled.
Q2: How do I choose the right size?
Measure the internal diameter of the fish and match it to the spear's fishing range.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For releasing spear selection, contact HYRIG: info@hyrig.com
Please include: fish ID, connection, required fishing range, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.