Non-Rotating Stabilizer | Cased Hole Protection, 5 13/16 to 12 1/4 in

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the non-rotating stabilizer range. The non-rotating stabilizer is a downhole tool used in cased hole intervals to stabilize the drill string, preventing tool joints and downhole tools from striking and wearing the casing.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Application: Cased hole intervals
  • Function: Prevents tool joints from striking and wearing casing
  • Max Working OD: 148 mm to 311 mm
  • Connection: NC31, NC38, NC46, NC50
  • Design: Non-rotating sleeve design

Key Specifications

TypeMax Working OD mm (in)Length L (mm)Length L1 (mm)Connection
FXWZ148148 (5 13/16)1000300NC31
FXWZ165165 (6 1/2)1100300NC38
FXWZ213213 (8 3/8)1150350NC46
FXWZ239239 (9 7/16)1250350NC46
FXWZ311311 (12 1/4)1450400NC50

Data source: Technical data table.

Dimensions

ItemDescription
Max Working ODOuter diameter of the non-rotating sleeve.
Overall LengthTotal length L; confirm clearance through casing.
Water Hole ID51 mm to 71 mm; match to drill string flow requirements.

Structure / Working Principle

The non-rotating stabilizer uses a sleeve that does not rotate with the drill string. This prevents the tool joints and downhole tools from directly contacting and wearing the casing during rotation. It is primarily used in cased hole sections to prolong the working life of both the casing and the drill string.

Cross-Reference & Replacement

Looking to replace a non-rotating stabilizer?

  1. Confirm Casing ID - Ensure the working OD clears the casing.
  2. Confirm Connection - Match to your drill string (NC31, NC38, NC46, NC50).
  3. Confirm Length - Verify the overall length and L1 dimension against your BHA.

Applications

  • Cased hole drilling: Prevents casing wear from rotating tool joints.
  • Directional wells: Stabilizes the drill string in the cased section.
  • Deep wells: Prolongs the life of casing and drill string components.

Selection Support

Send the casing ID, connection, and BHA requirements; HYRIG will confirm the matching non-rotating stabilizer.

Frequently Asked Questions

Q1: What is the main function of a non-rotating stabilizer?
It prevents tool joints and downhole tools from striking and wearing the casing in cased hole intervals.

Q2: How do I choose the right size?
Match the max working OD to your casing ID and confirm the connection matches your drill string.

Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.

Contact

For non-rotating stabilizer selection, contact HYRIG: info@hyrig.com

Please include: casing ID, connection, working OD requirement, and quantity.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit