| Type | OD (mm) | Connection | Water Hole (mm) | Max Load (kN) | Max Torque (N·m) |
|---|---|---|---|---|---|
| HAJ-105 | 105 | NC31 | 38 | 1340 | 12,700 |
| HAJ-159 | 159 | NC50 | 50 | 1600 | 35,000 |
| HAJ-203 | 203 | 6 5/8 FH | 71 | 3300 | 44,000 |
| AJ-C121 | 121 | NC38 | 57 | 2612 | 24,500 |
| AJ-C165 | 165 | NC50 | 71 | 4938 | 60,600 |
Data source: Technical data table.
| Item | Description |
|---|---|
| OD | Outer diameter of the safety joint. |
| ID | Inner diameter for fluid flow. |
| Length | Overall length of the joint; confirm against BHA drawing. |
The safety joint consists of two parts that are connected by a special thread or mechanism. Under normal operation, it bears the load and transmits torque. If the string becomes stuck, the safety joint can be backed off easily, allowing the upper part of the drill string to be retrieved. The lower part can be re-engaged later to continue operations.
Looking to replace a safety joint?
Send the connection size, load requirements, and thread direction; HYRIG will confirm the matching safety joint.
Q1: What is the purpose of a safety joint?
It provides a reliable release point in the drill string if the string becomes stuck.
Q2: What is the difference between H-type and AJ-type safety joints?
H-type and AJ-type safety joints have different structural designs, but both serve as emergency release points. AJ-type is available in right-hand and left-hand thread versions.
Q3: What is the lead time?
Standard sizes are typically 20-30 days after confirmation.
For safety joint selection, contact HYRIG: info@hyrig.com
Please include: connection, load requirements, thread direction, and quantity.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.