Product Overview
The HYRIG BB3 Hydrocracker Feed Pump is a heavy-duty, multi-stage, radial split, between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for hydrocracker unit feed (charge) service in refineries, this pump features a centerline mounted casing and between-bearing rotor support with multi-stage diffuser type hydraulics to achieve extremely high heads (up to 2500 meters) while handling hydrogen rich, high temperature hydrocarbon feedstocks (typically vacuum gas oil or deasphalted oil mixed with hydrogen).
Hydrocracker feed pumps operate at some of the most severe conditions in refining: discharge pressures up to 350 bar, temperatures approaching 400°C, and fluids containing high pressure hydrogen, H₂S, and heavy hydrocarbons. The BB3 configuration provides the pressure containment, rotor dynamics, and high head capability essential for this critical continuous service.
Key Technical Parameters
Pump Type: API 610 BB3 Radial Split, Multi-Stage (4 to 12 stages), Between-Bearing Centrifugal Pump
Flow Range: 50 – 800 m³/h (depending on hydrocracker capacity)
Head Range: 800 – 2500 m (higher with additional stages or higher speed)
Working Temperature: Up to 400°C
Design Pressure: Up to 350 bar (reactor loop pressure)
Structure: Centerline mounted casing, between-bearing dual support, radial split with cartridge style rotor
Seal Standard: API 682 mechanical seal – typically tandem dry gas seal (Plan 72+75) for hydrogen rich hydrocarbon service, or pressurized dual seal (Plan 53B) with compatible barrier fluid.
Materials: High strength chrome steel casing (A217 WC6, WC9, or C12A); 12% chrome (CA-15) or precipitation hardened stainless steel (17-4 PH) for internal flow parts; hardened stellited wear rings; materials selected per NACE MR0175/ISO 15156 for H₂S and hydrogen embrittlement resistance.
Application: Hydrocracker unit feed pump (charge pump from low pressure feed to reactor pressure), also suitable for other high pressure hydrogen plus hydrocarbon applications such as residue hydrocracking or VGO hydrocracking.
Key Features
API 610 BB3 Compliance – Built to the highest international standard for heavy duty, high energy, continuous refinery pumps.
Extreme High Head & Pressure Capability – Multi-stage impeller/diffuser design achieves up to 2500 meters head, pressurizing feed to reactor levels in a single pump without series operation.
Hydrogen Service Engineering – Materials specified for resistance to hydrogen embrittlement, high temperature hydrogen attack (HTLA), and H₂S cracking; strict hardness and heat treatment controls.
High Temperature Integrity – Centerline mounting allows thermal expansion without distortion; water jacketed bearing housings and thermally protected seal chambers.
Superior Rotor Dynamics – Between-bearing dual support with short bearing span, precision balanced multi-stage rotor (API 610 balance grade), and tilting pad bearings with forced oil or oil mist lubrication for high speed continuous duty.
Fugitive Emission Control – API 682 tandem dry gas seal (Plan 72 with nitrogen buffer + Plan 75 for primary vent) ensures zero hydrocarbon and hydrogen leakage to atmosphere.
High Efficiency Hydraulics – Optimized diffuser and impeller stages deliver hydraulic efficiency up to 85%, reducing power consumption at high head.
Low NPSH First Stage – First stage impeller designed for low suction energy; optional inducer available for marginal NPSH conditions.
Easy Maintenance – Radial split cartridge type back pull-out design allows complete rotor and bearing removal without disturbing piping or pump casing.
Typical Applications
Hydrocracker unit charge pump (VGO, DAO, or coker gas oil feed to reactor loop)
Residue hydrocracker feed pump
High pressure hydrogen recycle and feed boosting in hydrotreating/hydrocracking units
Other refinery high pressure, high temperature hydrogen services requiring multi-stage high head pumps
Why HYRIG?
HYRIG combines advanced multi-stage pump engineering with deep refinery hydrogen service experience. Each BB3 Hydrocracker Feed Pump undergoes finite element analysis for pressure containment, computational fluid dynamics (CFD) for hydraulic performance, rotordynamics analysis for vibration control, and API 682 seal support system integration to ensure safe, reliable operation. HYRIG BB3 pumps are installed in major hydrocrackers worldwide, delivering the 4–6 year run lengths demanded by modern high severity hydrocracking units.
Contact Us
For technical quotation, multi-stage hydraulic selection, or custom engineered solutions for your hydrocracker feed service, please email us at: info@hyrig.com
Our engineering team will respond within 24 hours with a pump selection optimized for your flow, head, and hydrogen service conditions.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.