Product Overview
The HYRIG BB3 Long-Distance Pipeline Pump is a heavy-duty, multi-stage, radial split, between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for long-distance pipeline booster stations and mainline pumping of crude oil, refined petroleum products (gasoline, diesel, jet fuel), and water, this pump features a centerline mounted casing and between-bearing rotor support with multi-stage diffuser type hydraulics to achieve heads up to 2000 meters in a single unit.
Long-distance pipeline pumps operate continuously for extended periods (20+ years) at varying flow rates with demanding reliability requirements. The BB3 configuration provides the high head capability, pressure containment, and robust rotor dynamics essential for pipeline applications where pump stations are spaced 50-150 km apart.
Key Technical Parameters
Pump Type: API 610 BB3 Radial Split, Multi-Stage (3 to 10 stages), Between-Bearing Centrifugal Pump
Flow Range: 100 – 1500 m³/h (higher with larger casing sizes)
Head Range: 500 – 2000 m (higher with additional stages or higher speed)
Working Temperature: -29°C to 120°C (extended with special materials)
Design Pressure: Up to 150 bar (ANSI 600 to 900 class equivalent; higher upon request)
Structure: Centerline mounted casing, between-bearing dual support, radial split with cartridge style rotor
Seal Standard: API 682 mechanical seal – typically pressurized dual seal (Plan 53B) for zero emissions of hazardous pipeline fluids, or tandem dry gas seal (Plan 72+75) for volatile hydrocarbons (light crude, refined products). Plan 11 + 62 suitable for water or non-volatile fluids.
Materials: Carbon steel (WCB/WCC) for general pipeline service; 12% chrome or 316 stainless steel for corrosive crude or sour service; NACE MR0175 compliance for H₂S containing fluids (sour crude/gas).
Application: Long-distance pipeline mainline pumps (crude oil, refined products, NGL, water), pipeline booster stations, transmission pipelines, trunk lines, and injection lines for waterflood.
Key Features
API 610 BB3 Compliance – Built to the most rigorous international standard for continuous, unattended pipeline service.
High Head Single Unit – Up to 10 stages deliver 500-2000 meters head, allowing fewer pump stations and lower capital cost.
High Efficiency – Advanced diffuser and impeller design achieves 85-89% efficiency, minimizing power consumption and energy cost over decades of operation.
Wide Operating Range – Stable performance from minimum continuous flow to maximum flow, accommodating pipeline batch and swing operations.
Pressure Containment – Heavy wall radial split casing with high strength bolting rated up to 150 bar (higher optional). Hydrostatically tested to 1.5x design pressure.
Thermal and Load Stability – Centerline mounting ensures alignment remains stable across temperature variations and pressure surges.
Superior Rotor Dynamics – Between-bearing dual support with conservative shaft sizing, balancing to API 610 Grade G, and tilting pad or multi-lobe bearings for smooth operation at high speeds.
Reliable Sealing – API 682 Plan 53B dual pressurized seal with barrier fluid provides zero leakage for environmental compliance; optional dry gas seals for volatile light ends.
Easy Maintenance – Back pull-out cartridge design allows complete rotor, seal, and bearing removal without disturbing spool pieces or piping, critical for remotely located pipeline stations.
Surge and Transient Handling – Robust construction withstands pipeline pressure surges (water hammer) with suitable design margin.
Typical Applications
Crude oil trunk line mainline pumping (onshore and offshore pipelines)
Refined products pipeline (gasoline, diesel, jet fuel, heating oil) transmission
Water pipeline for municipal or industrial long distance transfer
NGL (natural gas liquids) pipeline pumping
Waterflood injection pipelines for enhanced oil recovery (EOR)
Pipeline booster stations for pressure maintenance
Why HYRIG?
HYRIG combines pipeline-specific engineering with API 610 BB3 reliability. Each pump is designed with CFD optimized hydraulics for high efficiency across pipeline operating curves, rotordynamics analysis for vibration-free continuous operation, and API 682 seal systems tailored to the pipeline fluid. HYRIG pumps are installed in major pipeline networks worldwide, offering 20+ year service life with minimal maintenance.
Contact Us
For technical quotation, pipeline hydraulic analysis, or custom engineered solutions for your long-distance pumping application, please email us at: info@hyrig.com
Our engineering team will respond within 24 hours with a pump selection optimized for your pipeline diameter, length, flow, and fluid properties.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.