HYRIG BB3 Rich Methanol Pump – API 610 Radial Split Multi-Stage Between-Bearing Centrifugal Pump for Rich Methanol Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB3 Rich Methanol Pump: API 610 radial split multi-stage between-bearing design for rich methanol circulation in Rectisol acid gas removal. Flow 100-2000 m³/h, head 150-600 m, temp down to -75°C, design pressure up to 60 bar. Handles low temperature methanol loaded with CO2 and H2S. Centerline mounted, impact tested materials, API 682 double mechanical seal (Plan 53B/52), back pull-out cartridge design.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB3 Rich Methanol Pump is a heavy-duty, multi-stage, radial split, between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for rich (loaded) methanol circulation in acid gas removal units (Rectisol process) – where methanol has absorbed CO₂, H₂S, and other acid gases from syngas – this pump features a centerline mounted casing and between-bearing rotor support with multi-stage diffuser hydraulics to handle large flow rates at moderate to high heads while operating at very low temperatures (down to -75°C).

Rich methanol pumps transport the acid-gas-loaded methanol from the bottom of the absorber column to flash drums and/or to the regenerator (stripper) for solvent regeneration. Unlike lean methanol pumps that require extremely high head (500-1200 m), rich methanol pumps typically operate at lower differential pressures, but must still handle corrosive, volatile, and low-temperature fluids reliably. The BB3 configuration provides the head flexibility, pressure containment, and long-term reliability essential for continuous syngas purification in ammonia plants, methanol plants, and hydrogen production units.

Key Technical Parameters

  • Pump Type: API 610 BB3 Radial Split, Multi-Stage (2 to 6 stages), Between-Bearing Centrifugal Pump

  • Flow Range: 100 – 2000 m³/h (depending on acid gas removal unit capacity)

  • Head Range: 150 – 600 m (higher with additional stages for specific layouts)

  • Working Temperature: Down to -75°C

  • Design Pressure: Up to 60 bar

  • Structure: Centerline mounted casing, between-bearing dual support, radial split with cartridge style rotor

  • Seal Standard: API 682 double mechanical seal – typically Plan 53B (pressurized dual seal) with low temperature barrier fluid, or Plan 52 for containment with flare or vent collection.

  • Materials: Low temperature carbon steel (LCB/LCC) or austenitic stainless steel (304L/316L) with full Charpy impact testing per ASTM A370 at -75°C; internal trim with enhanced corrosion allowance for wet acid gas (H₂CO₃ / H₂S).

  • Application: Rich methanol pump from absorber bottom to flash drum train and/or regenerator in Rectisol process for ammonia, methanol, hydrogen, or SNG plants.

Key Features

  • API 610 BB3 Compliance – Highest international standard for continuous heavy duty service in syngas purification.

  • Low Temperature Integrity – Centerline mounting accommodates thermal contraction; materials fully impact tested to -75°C for Rectisol conditions.

  • Acid Gas Corrosion Resistance – Stainless steel wetted parts or carbon steel with corrosion allowance for H₂S and CO₂ saturated methanol (wet acid gas).

  • Leak-Free Sealing – API 682 Plan 53B dual pressurized seal eliminates fugitive methanol and acid gas emissions, critical for environmental compliance with volatile organic compounds (VOCs).

  • Wide Flow Range Capability – Stable operation across turndown conditions typical of absorber start-up, normal, and upset scenarios.

  • Superior Rotor Dynamics – Between-bearing design with precision balanced multi-stage rotor, conservatively sized shafts, and tilting pad or multi-lobe bearings for vibration-free operation.

  • High Efficiency – CFD optimized diffuser and impeller stages maintain efficiency across the operating range, reducing life cycle energy cost.

  • Easy Maintenance – Radial split cartridge type back pull-out design allows rotor, bearing, and seal replacement without disturbing suction/discharge piping.

Typical Applications

  • Rich methanol pump (loaded methanol from absorber) in Rectisol unit for ammonia plants

  • Rich methanol pump in Rectisol unit for methanol plants (coal to methanol)

  • Acid gas removal for hydrogen production (blue hydrogen from SMR/ATR with carbon capture)

  • Rich solvent circulation in other low temperature methanol based acid gas removal systems (Linde, Lurgi processes)

  • Syngas purification for coal-to-SNG (substitute natural gas) projects

Why HYRIG?
HYRIG combines proven experience in low temperature methanol pumping with API 610 BB3 reliability. Each BB3 Rich Methanol Pump is designed with cryogenic impact tested materials, API 682 double seal support systems, finite element analysis for pressure containment, and rotordynamics analysis to ensure smooth, long-term operation. Our pumps are trusted in Rectisol units worldwide, delivering the performance required for continuous, 24/7 syngas purification.

Contact Us
For technical quotation, multi-stage hydraulic selection, or custom engineered solutions for your rich methanol pumping application, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your flow, head, temperature, and acid gas loading requirements.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit