BB3 Pump Technical Parameters – Complete Specifications for High Pressure Multistage Pumps

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
BB3 pump technical specification page. Performance range: flow 30–800 m³/h, max head 3500 m, speed 1480/2980 rpm, temperature -20 to 180°C. Casing materials: cast iron, stainless steel, duplex steel. Impeller & shaft: stainless steel / 4140 / 316L. Sealing: mechanical or packing gland. Horizontal multistage axial split design for easy maintenance. API/ISO compliant, suitable for boiler feed, water injection, chemical transfer. Download CAD 2D/3D models, installation drawings, and detailed dimension sheet.

Conatct For Details
DetailReview(0)Additional

This page provides detailed technical parameters of our BB3 horizontal multistage centrifugal pump, designed for high-pressure, medium-flow, continuous heavy-duty applications.

Performance Range

  • Flow rate: 30 – 800 m³/h (customizable upon request)

  • Total head: up to 3500 m

  • Rotational speed: 1480 rpm or 2980 rpm (50/60 Hz)

  • Medium temperature: -20°C to +180°C (higher with special materials)

  • Inlet/outlet diameter: customer-specific, flanged to your piping standard

Material Options

  • Casing: Cast iron, carbon steel, stainless steel (304/316), duplex steel

  • Impeller: Stainless steel (304, 316, 17-4PH, duplex)

  • Shaft material: 4140 (alloy steel), 316L, or duplex

  • Wear rings: hardened stainless or cobalt-based alloy

  • Sealing type: single or double mechanical seal (API 682 plan), or traditional packing gland

Structural & Dimensional Data

  • Configuration: horizontal multistage, axial split casing (BB3 type per API 610)

  • Maintenance: remove upper half casing without disturbing pipelines

  • We provide: CAD 2D dimension drawings, 3D models (STEP/IGES), installation layout, foundation plan, and part lists

Standards Compliance
Manufactured according to API 610 (latest edition) or ISO 13709, suitable for Class I, Zone 1 hazardous areas (ATEX/IECEx optional). Every pump is hydrostatically tested and performance-tested in accordance with ISO 9906.

Typical Applications Using These Parameters

  • Boiler feed water (power plants)

  • Oilfield water injection (onshore/offshore)

  • Chemical reactor feed

  • High-pressure reverse osmosis (RO) feed

  • Pipeline pressurization and desalination

Why Use Our Technical Data?
All parameters are verified by hydraulic design software and factory tests. We can adjust stage numbers, casing materials, and seal plans to match your exact duty point. Downloadable CAD drawings help you integrate the BB3 pump into your system without design delays.

Need a custom specification sheet or CAD drawing?
Contact our engineering support team for a free BB3 pump parameter sheet, cross-section drawing, or quotation.

Email: info@hyrig.com
We respond within 24 hours with technical data matched to your operating conditions.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit