The BB5 pump is an API 610 horizontal barrel-type multistage between-bearings centrifugal pump, specially engineered for ultra-high pressure, high temperature, and critical process duties in refineries, petrochemical plants, hydrogenation units, power plants, and high-pressure injection systems. Unlike BB3 (axial split) or BB4 (segmental/barrel), the BB5 features a full barrel casing with an inner cartridge rotor assembly, delivering the highest pressure rating among API 610 pumps.
Key Design Features
API 610 BB5 Barrel Type Construction – Heavy-duty barrel casing contains the internal multistage cartridge, designed to safely withstand extreme working pressures.
Cartridge Inner Rotor – The complete rotating assembly (impellers, shaft, bearings, wear rings, interstage bushings) is removable as a single cartridge. Overhaul can be performed without disturbing the barrel casing or piping.
Ultra-High Pressure Resistance – Capable of working pressures exceeding 200 bar (3,000 psi) – up to 400 bar or higher on request.
Centerline Mounted – Casing feet at shaft centerline allow even thermal expansion at high temperatures up to 425°C+, preventing misalignment.
Low NPSH – Optimized first stage impeller or inducer option for low suction pressure conditions.
Low Vibration & Heavy-Duty 24/7 Operation – Between-bearings design, stiff shaft, and precision balancing ensure years of continuous service.
API 682 / Dry Gas Seal – Supports all API 682 seal plans; dry gas seals available for hydrogen or light hydrocarbon services.
Typical Performance Range
Flow: up to 800 m³/h (medium flow, typical for high-head barrel pumps)
Head: up to 3,500 m+ (multistage, very high head)
Working pressure: 200–400+ bar (barrel type)
Temperature: up to 425°C (797°F)
Speed: 1480 / 2980 rpm (50/60 Hz) or custom with variable speed drive
Material Options
Casing: Alloy steel, carbon steel, 316L, duplex, super duplex (for corrosive high-pressure service)
Impeller & diffuser: Stainless steel (17-4PH, 316L), duplex, high chromium alloy
Shaft: Alloy forged steel (high strength), 316L, K500
Internal cartridge components: Anti-wear, anti-corrosion alloys
Main Applications
Refinery Hydrogenation Feed – Hydrocracker, hydrotreater, and reformer feed pumps. Hydrogen-rich service at 150–250 bar, high temperature. Dry gas seal recommended.
High-Pressure Boiler Feed – Ultra-supercritical power plant boiler feed pumps requiring extreme pressure and temperature capability.
Ethylene Plant Process – High-pressure ethylene and propylene feed pumps in petrochemical crackers.
Oilfield Ultra-High Pressure Water Injection – Deep reservoir injection (>200 bar) for enhanced oil recovery.
Desalination High-Pressure Pump – Very high pressure RO systems (100+ bar) for high-recovery seawater desalination.
Critical Chemical Process – Handling corrosive media at extreme pressures (e.g., urea, ammonia, methanol synthesis).
Why Choose Our BB5 Pump?
Highest Pressure Rating – BB5 barrel design is the ultimate API 610 pump for extreme pressure and temperature.
Easy Maintenance – Cartridge design allows full rotor extraction without uncasing the barrel or disconnecting piping. Maintenance time reduced by up to 50%.
Leak-Free Operation – Barrel casing has no axial joint; only seal and flange connections. Dry gas seal option for zero emissions.
Long Service Life – Heavy-duty bearings, precision internal clearances, and wear-resistant materials.
Full Customization – Stage count, material grade, seal plan, and driver arrangement tailored to your duty.
Get Your BB5 Pump Technical Package
We provide free:
BB5 datasheet (API 610 format)
Performance curve (head, efficiency, NPSHr)
CAD drawing (2D installation drawing, PDF/DWG)
3D model (STEP/IGES)
Factory direct quotation (EXW / FOB / CIF)
How to Request?
Send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Working pressure (bar or psi)
Fluid name and temperature (°C)
Any special requirement (hydrogen service, NACE, dry gas seal, etc.)
Our engineering team will reply within 24 hours with the recommended BB5 pump model, drawings, and factory price.
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (BB1, BB2, BB3, BB4, BB5, OH types) serving global refineries, petrochemical plants, power utilities, and oilfield operators. Contact us for custom-engineered BB5 pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.