BB5 Pump Project Cases – Hydrogenation, Supercritical Boiler Feed, Ultra-High Pressure Injection & Desalination RO

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Four BB5 pump successful cases. Case 1: Refinery hydrogenation unit – API 610 BB5 barrel pump for hydrogenation feed, high temperature & ultra-high pressure, stable operation for years. Case 2: Supercritical power plant boiler feed – BB5 multistage barrel pump for high-pressure boiler feed, high efficiency, perfect match for supercritical unit load demand. Case 3: Oilfield ultra-high pressure water injection – custom high-pressure BB5 pump set for deep well reservoir injection, stable pressure output, low maintenance. Case 4: Seawater desalination high pressure system – duplex material BB5 pump, anti-corrosion and ultra-high pressure resistant, reliable for long-term RO system operation. We provide site photos, process parameters, and project reference data for each installation.

Conatct For Details
DetailReview(0)Additional

This page presents verified field cases of our API 610 BB5 horizontal barrel-type multistage between-bearings pumps operating in the most demanding ultra-high pressure, high temperature critical services. Each case demonstrates the pump's unparalleled reliability, safety, and performance.


Case 1 – Refinery Hydrogenation Unit (Middle East)

Background: A major refinery required a high-pressure feed pump for a new hydrocracker unit. Operating conditions: hydrogen-rich service, 220 bar pressure, 380°C temperature. Zero leakage requirement due to hydrogen safety.

BB5 Pump Solution:

  • Flow: 280 m³/h

  • Head: 2,100 m

  • Pressure: 210 bar

  • Temperature: 380°C

  • Material: Alloy steel barrel, 17-4PH impellers, NACE MR0175 compliant

  • Seal: Tandem dry gas seal (API 682 Type C)

Results:

  • Stable operation for over 4 years without unplanned downtime

  • Dry gas seal achieved zero hydrogen emissions

  • Cartridge rotor design allowed quick inspection during turnaround (barrel remained in place)

  • Vibration levels consistently below 2.0 mm/s

Available references: Site photo, P&ID, dry gas seal commissioning report.


Case 2 – Supercritical Power Plant Boiler Feed (Asia)

Background: A 600 MW supercritical coal-fired power plant needed a high-pressure boiler feed pump capable of matching variable load demands with high efficiency.

BB5 Pump Solution:

  • Flow: 850 m³/h

  • Head: 1,950 m

  • Pressure: 190 bar

  • Temperature: 210°C

  • Material: Carbon steel barrel, stainless steel internals

  • Seal: API 682 Plan 23 mechanical seal

  • Drive: Variable speed coupling

Results:

  • High efficiency (84%) across 50–100% load range

  • Perfect match with supercritical unit load demand – stable feedwater pressure under rapid ramping

  • Centerline mounting eliminated thermal misalignment during start-up cycles

  • Forced oil lubrication ensured bearing reliability at variable speeds

Available references: Performance test report, efficiency curve, site installation photo.


Case 3 – Oilfield Ultra-High Pressure Water Injection (North America)

Background: An oilfield operator required an ultra-high pressure water injection pump for a deep reservoir (4,200 m) secondary recovery project. Required pressure: 350 bar.

BB5 Pump Solution:

  • Flow: 180 m³/h

  • Head: 3,600 m

  • Pressure: 350 bar

  • Material: High-strength alloy steel barrel, anti-abrasion internal coatings

  • Seal: API 682 Plan 53B dual mechanical seal

  • Lubrication: Forced oil system

Results:

  • Stable pressure output within ±1% over 2.5 years continuous operation

  • Low maintenance – only annual seal and bearing inspection

  • Wear-resistant internals showed minimal erosion despite trace sand content

  • Barrel casing safely contained extreme pressure without any leak

Available references: Wellhead pressure log, maintenance record, site photos.


Case 4 – Seawater Desalination High Pressure RO System (Middle East)

Background: A large-scale seawater reverse osmosis (SWRO) plant needed an ultra-high pressure feed pump for a high-recovery (60%) system operating at 110 bar. Seawater chlorides required superior corrosion resistance.

BB5 Pump Solution:

  • Flow: 520 m³/h

  • Head: 1,150 m

  • Pressure: 112 bar

  • Material: Super duplex stainless steel (barrel, impeller, shaft)

  • Seal: API 682 Plan 53B with seawater-compatible faces

Results:

  • No corrosion or pitting after 3 years in aggressive chloride environment

  • Reliable long-term RO system operation with minimal membrane fouling (stable pressure)

  • High efficiency reduced specific energy consumption by 7%

  • Cartridge design enabled fast seal replacement without barrel removal

Available references: RO plant operating data, material certificate (EN 10204 3.1), site installation image.


What You Can Request From Us for Each Case

  • Site photos and installation images

  • Project parameter sheet (flow, head, pressure, temperature, material, seal)

  • Actual operating data (pressure trend, vibration, bearing temperature, power consumption)

  • Process & instrumentation diagram (P&ID) where available

  • User reference contact (with prior permission)

Why Real Project Cases Matter

Field references prove that our BB5 pumps deliver:

  • Safe, reliable operation in hydrogenation and other ultra-high pressure services

  • High efficiency across variable loads in supercritical power plants

  • Ultra-high pressure capability (350 bar+) for deep well injection

  • Superior corrosion resistance with duplex/super duplex for desalination

  • Lowest failure rate among all API pump types for critical duties

Get the Complete BB5 Pump Case Study Package

We can match your operating conditions to similar successful installations. Request the BB5 pump project case PDF or ask for references in your specific industry.

Email: info@hyrig.com

Please specify your industry (refinery hydrogenation / supercritical power / oilfield injection / desalination) and we will send relevant case studies, photographs, and technical data within 24 hours. We also welcome inquiries for custom BB5 pump selection and factory direct pricing for critical process applications.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit