HYRIG BB5 High-Pressure Ammonium Carbamate Pump – API 610 Barrel Type Multi-Stage Between-Bearing Centrifugal Pump for Urea Carbamate Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB5 High-Pressure Ammonium Carbamate Pump: API 610 barrel type multi-stage between-bearing design for urea high pressure carbamate service. Flow 5-200 m³/h, head 1400-2500 m, temp up to 200°C, design pressure up to 260 bar. Handles corrosive ammonium carbamate solution. Barrel casing for safe containment and pull-out cartridge rotor. Duplex stainless steel or titanium materials, API 682 mechanical seal (Plan 53B/54), high efficiency multistage hydraulics.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB5 High-Pressure Ammonium Carbamate Pump is a heavy-duty, multi-stage, barrel type (radial split outer barrel), between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for high pressure ammonium carbamate service in urea plants – pumping highly corrosive carbamate solution from the downstream of the CO₂ stripper or high pressure scrubber back to the urea reactor – this pump features a cylindrical outer barrel casing (radial split, end‑pull‑out design) that contains the full internal multi-stage cartridge assembly. The barrel configuration is mandatory for extremely high pressures (140–250 bar) and hazardous, toxic or corrosive fluids because it provides superior pressure containment and allows safe removal of the internal rotating element without dismantling the high pressure piping.

Ammonium carbamate is extremely corrosive to conventional stainless steels. It also decomposes at elevated temperatures, generating ammonia and CO₂. The HYRIG BB5 pump uses high grade duplex stainless steel or titanium for all wetted parts, along with advanced sealing to prevent any fugitive emissions. The barrel casing also ensures the pump meets the safety and reliability demands of continuous urea synthesis (Stamicarbon, Saipem, Toyo, etc.).

Key Technical Parameters

  • Pump Type: API 610 BB5 Barrel Type, Multi‑Stage (4 to 12 stages), Between‑Bearing Centrifugal Pump

  • Flow Range: 5 – 200 m³/h (typical urea capacities 50–200 m³/h)

  • Head Range: 1400 – 2500 m (corresponding to 140–250 bar discharge pressure)

  • Working Temperature: Up to 200°C (typical carbamate temperature 120–190°C)

  • Design Pressure: Up to 260 bar (outer barrel hydrostatically tested to 1.5x)

  • Structure: Barrel casing (cylindrical radial split outer shell) with end‑pull‑out cartridge style rotor; between‑bearing internal support; liquid cooled barrel jackets optional.

  • Seal Standard: API 682 mechanical seal – typically Plan 53B (pressurized dual seal with barrier fluid) or Plan 54 (external pressurized fluid) to ensure zero contamination of carbamate and zero leakage to environment. Quench (Plan 62) also applied.

  • Materials: Duplex stainless steel (UNS S31803 / S32205) or Super Duplex (UNS S32750) for most urea carbamate services; Titanium (Grade 2 or Grade 7) for severe high chloride or low pH conditions; hard faced stellited wear rings and bushings; barrel casing forged from high strength alloy steel with duplex stainless steel internal lining.

  • Application: High pressure ammonium carbamate recycle pump in urea synthesis loop (carbamate return from stripper or scrubber to reactor); also suitable for other high pressure corrosive chemical injection services.

Key Features

  • API 610 BB5 Compliance – Built to the highest standard for severe, high pressure, continuous duty pumps in hazardous services.

  • Barrel Casing Safety – Cylindrical outer barrel provides absolute containment for carbamate at up to 250 bar; internal cartridge contains all pressure‑boundary flanges, minimizing potential leak paths.

  • End Pull‑Out Design – Complete rotating assembly (impellers, diffusers, shaft, bearings, mechanical seal) can be removed from the barrel as a cartridge without disturbing high pressure suction/discharge piping – greatly reduces maintenance time.

  • Multi‑Stage High Head – 4 to 12 precision machined stages develop the necessary 140–250 bar differential pressure in a single pump, eliminating complex series arrangements.

  • Superior Corrosion Resistance – Duplex stainless steel or titanium wetted parts resist ammonium carbamate corrosion, intergranular attack, and chloride stress cracking. Stellite hardfacing on wear rings.

  • High Temperature Integrity – Barrel cooling option (water jacket) to minimize external surface temperature; internal clearances and materials selected for 200°C continuous service.

  • Low NPSH First Stage – First stage impeller specially designed for low available suction head typical of high pressure carbamate vessels.

  • Fugitive Emission Control – API 682 Plan 53B dual pressurized seal with compatible synthetic barrier fluid (compatible with carbamate) guarantees zero process leakage and protects environment.

  • High Efficiency & Stable Operation – CFD optimized multistage diffuser/impeller stages achieve up to 84% efficiency at high head; flat curve for stable operation where backpressure varies.

  • Heavy Duty Rotor Dynamics – Between-bearing layout with short span, high rigidity shaft, tilting pad bearings, and oil mist lubrication for vibration‑free, continuous uninterrupted service (8000+ hour run lengths).

  • Full Hydrostatic Testing – Barrel and cartridge assembled and pressure tested to 1.5x maximum allowable working pressure (MAWP) before shipment.

Typical Applications

  • High pressure carbamate recycle pump (HP carbamate pump) in urea plants (Stamicarbon, Saipem, Toyo, Urea Casale processes)

  • Carbamate solution return from CO₂ stripper to urea reactor

  • Carbamate feed from high pressure scrubber/absorber to reactor

  • Replacement of older HP pumps in urea debottlenecking or revamp projects

  • High pressure injection of aggressive chemicals where barrel type API 610 BB5 pumps are specified

Why HYRIG?
HYRIG brings decades of urea plant carbamate pumping expertise. Each BB5 High-Pressure Ammonium Carbamate Pump is designed with barrel type containment for operator safety, corrosion resistant duplex/titanium fluid ends, API 682 dual sealing for zero emissions, finite element analysis for pressure boundary integrity, and rotordynamics analysis for high speed reliability. Our pumps are operating successfully in major urea production facilities worldwide, offering continuous service with >3–5 years between turnarounds.

Contact Us
For technical quotation, multistage hydraulic selection, material certification (duplex / titanium), or custom engineered solutions for your urea synthesis loop, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your carbamate flow, pressure, temperature, and plant process design (stripping or total recycle).


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit