HYRIG BB4 Descaling Pump – API 610 Horizontal Split Case Multi-Stage Between-Bearing Centrifugal Pump for High Pressure Descaling Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB4 Descaling Pump: API 610 horizontal split case multi-stage between-bearing design for high pressure water descaling. Flow 100-500 m³/h, head 1500-4200 m (150-420 bar), temp up to 80°C, design pressure up to 450 bar. Handles clean or slightly contaminated industrial water. Horizontal split casing for easy rotor access. Duplex/super duplex stainless steel construction, API 682 mechanical seal (Plan 11+62 or Plan 53B), high efficiency multistage hydraulics.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB4 Descaling Pump is a heavy-duty, multi-stage, horizontal split case (axially split), between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for high pressure water descaling in steel hot rolling mills (slab, plate, rod, and bar mills), this pump features a horizontal split casing (upper and lower half) and between-bearing rotor support with multi-stage diffuser hydraulics to generate extremely high discharge pressures (up to 420 bar / 4200 m head) at moderate flow rates – the ideal hydraulic profile for removing iron oxide scale from hot steel surfaces prior to rolling stands.

Descaling pumps operate in demanding environments: frequent start/stop cycles (intermittent spraying), high pressure pulsations, moderately corrosive water (mill scale particles, slight pH variations), and require high availability to keep rolling mills productive. The BB4 horizontal split case design allows rapid inspection and maintenance of the rotor, bearings, seals, and internal clearances by simply removing the upper casing half – without disturbing piping. Duplex/super duplex stainless steel metallurgy ensures long life against erosion and corrosion.

Key Technical Parameters

  • Pump Type: API 610 BB4 Horizontal Split Case, Multi‑Stage (3 to 9 stages), Between‑Bearing Centrifugal Pump

  • Flow Range: 100 – 500 m³/h (higher for large slab mills upon request)

  • Head Range: 1500 – 4200 m (150 bar to 420 bar discharge pressure)

  • Working Temperature: Up to 80°C (typical ambient 15‑50°C, peak during continuous operation)

  • Design Pressure: Up to 450 bar (hydrostatic test to 675 bar)

  • Structure: Horizontal split case (axially split), between-bearing dual support, with single suction or double suction first stage impeller for low NPSH.

  • Seal Standard: API 682 mechanical seal – typically Plan 11 (recirculation with orifice) + Plan 62 (water quench) to flush solids and cool seal faces, or Plan 53B for zero-leakage applications with compatible barrier fluid.

  • Materials: Duplex stainless steel (UNS S31803 / S32205) standard; Super Duplex (UNS S32750 / S32760) for high chloride or aggressive water; 17-4 PH impellers for high strength; hardened stellited wear rings and bushings; carbon steel casing with stainless steel trim available for less corrosive service.

  • Application: High pressure water descaling in steel hot rolling mills (roughing and finishing stands); also suitable for high pressure water jetting, hydrodemolition, and other industrial high pressure water systems.

Key Features

  • API 610 BB4 Compliance – Built to the most rigorous pump standard for continuous, high reliability service – exceeds typical mill duty requirements.

  • Horizontal Split Casing Maintainability – Upper half removed to access complete rotating assembly without disconnecting suction or discharge headers, reducing mill downtime during descaling pump servicing.

  • Extreme High Pressure Capability – Up to 9 stages produce pressures up to 420 bar, matching the most demanding slab and plate mill nozzle requirements.

  • Corrosion & Erosion Resistance – Duplex stainless steel (or Super Duplex) wetted parts provide excellent resistance to chloride stress corrosion cracking, erosion from mill scale particles, and cavitation damage.

  • Low NPSH First Stage – Optimized first stage impeller geometry (double suction optional) to handle low suction pressure common in descaling water tanks and booster systems.

  • High Efficiency – CFD designed multi‑stage diffuser and impeller combinations deliver up to 86% efficiency, significantly reducing motor power consumption and cooling water load.

  • Robust Rotor Dynamics – Between-bearing support with short bearing span, precision balanced rotor (API 610 Grade G), heavy duty rolling element or tilting pad bearings, and optional oil mist lubrication for continuous high speed operation.

  • Reliable Sealing for High Pressure Cycling – API 682 Plan 11 + 62 ensures seal faces are flushed and cooled; quench prevents drying and solids packing on atmospheric side. Plan 53B optional for zero leakage where mill water is not permitted on floor.

  • Quick Inspection – Horizontal split design allows rapid internal clearance check (wear rings, interstage bushings, thrust balance) without rotor extraction – critical for scheduled mill maintenance windows.

  • Heavy Duty Bearings & Shaft – Over‑sized shaft diameter and high capacity bearings withstand radial loads from frequent start/stop and pressure surges.

Typical Applications

  • Main descaling pump for hot strip mill (HSM), plate mill, and Steckel mill

  • Roughing stand descaling water supply in rod and bar mills

  • High pressure water jetting for concrete demolition, surface preparation, and cleaning

  • Industrial high pressure water systems requiring 150–400 bar at moderate flow

  • Replacement of older BB3 radial split or non‑API pumps in steel plants – BB4 horizontal split improves maintainability

Why HYRIG?
HYRIG combines steel mill engineering experience with API 610 BB4 reliability. Each BB4 Descaling Pump is designed with corrosion resistant duplex metallurgy, CFD optimized multi‑stage hydraulics for flat pressure‑flow curve (stable across nozzle variations), finite element analysis for pressure containment at 420 bar, and API 682 seal support systems tailored to industrial water service. Our BB4 descaling pumps are installed in major steel producers worldwide, delivering the uptime, high pressure consistency, and ease of maintenance required for modern high‑speed hot rolling mills.

Contact Us
For technical quotation, multi‑stage hydraulic selection, or custom engineered solutions for your descaling system (slab, plate, or bar mill), please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your flow, pressure, water quality, and mill operating cycle.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit