Product Overview
The HYRIG BB4 Condensate Pump is a heavy-duty, multi-stage, horizontal split case (axially split), between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for condensate extraction, transfer, and return service in power plants (thermal, nuclear, combined cycle), industrial steam systems (refineries, chemical plants, pulp & paper mills), and district heating networks, this pump features a horizontal split casing (upper and lower half) which provides excellent accessibility for maintenance without disturbing suction or discharge piping.
Common condensate applications involve hot water (typically 80°C – 120°C, up to 180°C for flash recovery) with possible low levels of corrosion, carbon dioxide, or oxygen. The BB4 horizontal split case design allows operators to inspect impellers, wear rings, and bearings by simply removing the upper casing half – a key advantage for plant maintenance schedules. The multi-stage configuration provides moderate to high heads (up to 500 m) at moderate flow rates, suitable for pumping from hotwell or condenser pit to deaerator or feedwater system.
Key Technical Parameters
Pump Type: API 610 BB4 Horizontal Split Case, Multi‑Stage (2 to 8 stages), Between‑Bearing Centrifugal Pump
Flow Range: 30 – 1200 m³/h (higher upon request for large turbine generators)
Head Range: 50 – 500 m (higher with additional stages)
Working Temperature: Up to 180°C (higher with thermal jacketing)
Design Pressure: Up to 30 bar (ANSI 150 to 300 class)
Structure: Horizontal split case (axially split), between-bearing dual support, with single suction or double suction first stage impeller for low NPSH.
Seal Standard: API 682 mechanical seal – typically Plan 11 (recirculation from casing) + Plan 62 (quench) for hot water/condensate, or optional Plan 53B for zero emissions where required.
Materials: Carbon steel (WCB/WCC) for general condensate service; 12% chrome (CA‑15) or 304/316 stainless steel for corrosive or high purity condensate (nuclear, food, pharmaceutical); hardened wear rings standard.
Application: Condensate extraction pump (hotwell to deaerator); condensate return from steam traps/headers to boiler feed tank; high temperature hot water circulation; district heating return pump.
Key Features
API 610 BB4 Compliance – Built to the highest standard for continuous, long-life pump service in power and process industries.
Horizontal Split Casing Accessibility – Upper casing half lifts off to expose the complete rotor, bearings, and internal clearances without disconnecting piping – significantly reduces maintenance downtime during outages.
Low NPSH Capability – First stage impeller specially sized or double suction option to handle low available NPSH typical in condenser pits and hotwells.
Multi-Stage Head Flexibility – 2 to 8 stages deliver heads from 50 to 500 meters, matching deaerator pressure and elevation requirements.
High Efficiency – CFD optimized multi-stage hydraulics achieve up to 85% efficiency, reducing energy consumption in continuous 24/7 operation.
Thermal and Hydraulic Stability – Centerline support feet and balanced rotor design ensure reliable operation with hot condensate.
Corrosion and Erosion Resistance – Material options include stainless steel for low pH condensate; hardened stellited wear rings for clean but erosive conditions.
Reliable Sealing – API 682 Plan 11 provides seal cooling and flushing; Plan 62 quench prevents vaporization or deposit buildup on atmospheric side.
Heavy Duty Bearings – High capacity rolling element bearings with oil bath or oil mist lubrication for extended service life and low vibration.
Ease of Inspection – Horizontal split design also facilitates quick clearance checks and minor repairs without rotor removal – a major benefit for plant maintenance teams.
Typical Applications
Condensate extraction pump in steam turbine power plants (thermal and nuclear)
Combined cycle gas turbine (CCGT) plant condensate return from condenser to heat recovery steam generator (HRSG)
Industrial boiler house condensate transfer from flash tanks to deaerator
Refinery and chemical plant steam system condensate recovery
Pulp & paper mill condensate return to cogeneration boiler feed system
High temperature hot water circulation for district heating or process heating
Why HYRIG?
HYRIG combines decades of condensate pumping experience with API 610 reliability. Each BB4 Condensate Pump is designed with horizontal split convenience, CFD optimized multi‑stage hydraulics, low NPSH first stage, and API 682 sealing systems to suit hot condensate applications. Our BB4 pumps are trusted in power plants and industrial facilities worldwide, delivering the uptime, ease of maintenance, and efficiency required for steam cycle reliability.
Contact Us
For technical quotation, multi-stage hydraulic selection, or custom engineered solutions for your condensate system, please email us at: info@hyrig.com
Our engineering team will respond within 24 hours with a pump selection optimized for your condensate flow, head, temperature, and NPSH availability.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.