API 610 BB4 Water Injection Pump 70-125*10

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The WATER INJECTION PUMP 70-125*10 BB4 is an API 610 compliant horizontal multistage segmental centrifugal pump, specifically designed for demanding high‑pressure applications such as water injection and boiler feed water. In the model designation, “70” indicates a design flow rate of approximately 70 m³/h, “125” is the nominal impeller diameter (125 mm), and “10” stands for 10 impeller stages in series, giving a total head of 1000–1500 meters. The pump features a single‑casing, segmental construction with horizontal suction and vertical discharge, plus centerline support for excellent thermal stability. Axial thrust is balanced by a combination of a balance drum and a thrust bearing. Together with an API 682 compliant mechanical seal, the pump is suitable for media temperatures from -20°C to +210°C and a maximum working pressure of 15 MPa. It is widely used in oilfield high‑pressure water injection, power plant and industrial boiler feed water, reverse osmosis seawater desalination,
Conatct For Details
DetailReview(0)Additional

The WATER INJECTION PUMP 70-125*10 BB4 is a heavy-duty, horizontally mounted, multistage centrifugal pump designed and manufactured in strict compliance with API 610 (ISO 13709) standard. Its BB4 configuration features a single-case, segmental (diffuser) design, making it ideal for high-pressure water injection, boiler feed, and other demanding industrial applications.

Model Interpretation

  • 70 – Rated flow approx. 70 m³/h

  • 125 – Nominal impeller diameter: 125 mm

  • 10 – Number of stages (10 impellers in series)

  • BB4 – Horizontal, between-bearings, multistage, segmental-ring casing pump

Key Parameters (Reference Values)

  • Flow rate (Q): ~70 m³/h

  • Total head (H): 1000 – 1500 m (single-stage head 100–150 m)

  • Rotational speed (n): 1480 / 2980 r/min

  • Medium temperature: -20°C ~ +210°C

  • Maximum working pressure: 10.0 – 15.0 MPa

  • Flange arrangement: Horizontal suction, vertical discharge

Structural & Design Highlights

  • Segmental casing with forged intermediate and discharge sections for high pressure containment

  • All impellers arranged in the same direction to ensure high efficiency and low vibration

  • Centerline support for excellent thermal stability under hot or cold service

  • Axial thrust balance system combining a balance drum and heavy-duty thrust bearing, enabling long-term continuous operation

  • Shaft seals compliant with API 682 (mechanical seals, various plans available)

Typical Applications

  • Oilfield water injection – Maintaining reservoir pressure and enhancing oil recovery

  • Power plant & industrial boiler feed – Reliable high-pressure water supply

  • High-pressure water treatment – Reverse osmosis, seawater desalination

  • Petrochemical & coal chemical industries – Transporting high-pressure clean or slightly contaminated fluids

Why Choose This Pump?

  • Fully compliant with API 610, ensuring high reliability and low life-cycle cost

  • Capable of handling high pressures (up to 15 MPa) and moderate temperatures

  • Robust rotor dynamics, minimal vibration, and easy maintenance (segmental design allows stage-by-stage access)

  • Proven performance in continuous heavy-duty service, with thousands of operating hours

For more detailed specifications, customized solutions, or technical support, please feel free to contact us:
info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit