HYRIG BB5 Ultra-High-Pressure Boiler Feed Water Pump – API 610 Barrel Type Multi-Stage Between-Bearing Centrifugal Pump for Supercritical / Ultra‑Supercritical Boiler Feed Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB5 Ultra-High-Pressure Boiler Feed Water Pump: API 610 barrel type multi-stage between-bearing design for ultra‑high pressure boiler feed. Flow 100-800 m³/h, head 3500-5500 m (350-550 bar), temp up to 250°C, design pressure up to 580 bar. Handles deaerated water for supercritical/ultra‑supercritical once-through boilers. Barrel casing for safe containment, pull-out cartridge rotor. High strength alloy steel, API 682 mechanical seal (Plan 21+62 or Plan 53B). High efficiency multistage hydraulics.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB5 Ultra-High-Pressure Boiler Feed Water Pump is a heavy-duty, multi-stage, barrel type (radial split outer barrel), between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for supercritical and ultra‑supercritical boiler feed water (BFW) service in advanced coal‑fired power plants (up to 500 bar pressure), high efficiency large industrial steam generators, and ultra‑high pressure water injection systems, this pump features a cylindrical outer barrel casing that contains the complete multi‑stage internal cartridge. The BB5 barrel configuration is essential for boiler feed pressures exceeding 300 bar, because it provides superior pressure containment, eliminates hazardous flange leaks, and allows end‑pull‑out extraction of the rotating assembly without disturbing high pressure piping.

Modern ultra‑supercritical power plants operate at 300–350 bar (ultra‑supercritical) and next‑generation advanced‑ultra‑supercritical (AUSC) units reach 350–500 bar. The HYRIG BB5 delivers the safety, reliability, and maintainability demanded by these extreme conditions, with a design pressure up to 580 bar.

Key Technical Parameters

  • Pump Type: API 610 BB5 Barrel Type, Multi‑Stage (6 to 14 stages), Between‑Bearing Centrifugal Pump

  • Flow Range: 100 – 800 m³/h (larger flows up to 1200 m³/h with larger barrel)

  • Head Range: 3500 – 5500 m (350–550 bar discharge pressure)

  • Working Temperature: Up to 250°C (typical BFW temperature from deaerator 150–200°C)

  • Design Pressure: Up to 580 bar (barrel hydrostatically tested to 1.5x MAWP)

  • Structure: Barrel casing (cylindrical radial split outer shell) with end‑pull‑out cartridge style rotor; between‑bearing internal support; barrel cooling jacket optional for high ambient or extended operation.

  • Seal Standard: API 682 mechanical seal – typically Plan 21 (integral cooler) + Plan 62 (quench) for high temperature BFW, or Plan 53B (pressurized dual seal) for zero emissions where water leakage cannot be tolerated.

  • Materials: High strength alloy steel barrel (ASTM A470, A723 Grade 1/2, or A541) for creep resistance and high cycle fatigue; internal cartridge: 12% chrome (CA-15, 410) or 17-4 PH impellers and diffusers; hardened stellited wear rings and bushings; shaft from A479 410 or 17-4 PH.

  • Application: Main boiler feed pump for ultra‑supercritical coal / gas power plants; once‑through HRSG feed at very high pressure; high pressure water injection for industrial processes and desalination (where pressure > 350 bar).

Key Features

  • API 610 BB5 Compliance – Highest integrity standard for extreme pressure, continuous power plant pumps.

  • Barrel Casing Ultimate Safety – Cylindrical seamless barrel (forged and bored) eliminates gasketed joints that could fail under ultra‑high pressure BFW service. All high pressure boundaries are contained within the barrel.

  • End Pull‑Out Cartridge – Complete rotating element (impellers, diffusers, shaft, bearings, mechanical seal) can be withdrawn as a single cartridge without disturbing suction or discharge piping – critical for power plant outages.

  • Ultra‑High Head Capability – Up to 14 stages generate 3500–5500 m head, delivering boiler feed pressure up to 550 bar in a single pump without series operation.

  • High Temperature Strength – Creep resistant chromium‑molybdenum steel barrel and hot strength internals (12% Cr) maintain integrity at up to 250°C continuous duty.

  • Low NPSH First Stage – First stage impeller designed for low available NPSH from deaerator or booster pump; double suction first stage available for larger flows or lower suction energy.

  • High Efficiency Multistage Hydraulics – CFD optimized diffuser/impeller stages achieve up to 87% efficiency, minimizing auxiliary power consumption in base load power plants.

  • Advanced Rotor Dynamics – Between‑bearing configuration with large diameter, stiff shaft, short bearing span, tilting pad journal bearings, and forced oil or oil mist lubrication ensures vibration‑free operation at high speeds.

  • Reliable Sealing at Ultra‑High Pressure – API 682 Plan 21 includes an integral cooler to lower stuffing box temperature; Plan 62 quench prevents seal face overheating and drying. Optional Plan 53B for barrier fluid.

  • Barrel Cooling Jacket – Water jacket around outer barrel reduces skin temperature for operator safety and minimizes thermal stresses during start‑up.

  • Full Hydrostatic Testing – Each barrel assembly is pressure tested to 1.5x design pressure (up to 870 bar) and helium leak tested to ensure zero leakage through internal cartridge joints.

Typical Applications

  • Main boiler feed pump (BFW) for ultra‑supercritical coal‑fired power plants (600–1000 MW)

  • Once‑through boiler feed pumps for advanced combined cycle gas turbine (CCGT) plants with ultra‑high pressure HRSGs

  • Boiler feed for supercritical industrial steam plants (chemical, petrochemical, steel) requiring > 300 bar steam

  • Ultra‑high pressure water injection for enhanced oil recovery (EOR) and deep well injection (350+ bar)

  • High pressure feed for experimental supercritical water reactors and clean coal technology demonstration plants

Why HYRIG?
HYRIG combines power plant engineering leadership with API 610 BB5 reliability. Each BB5 Ultra‑High‑Pressure Boiler Feed Water Pump is designed with finite element analysis for barrel pressure integrity at 580 bar, rotordynamics analysis for high speed stability, CFD optimized multi‑stage hydraulics, API 682 seal support systems, and end‑pull‑out cartridge maintainability. Our BB5 pumps are operating in advanced ultra‑supercritical power plants worldwide, delivering the safety, efficiency, and availability required for 30+ year plant life.

Contact Us
For technical quotation, multistage hydraulic selection, ultra‑high pressure barrel engineering review, or custom solutions for your supercritical / ultra‑supercritical boiler feed application, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your boiler pressure, flow, temperature, and cycle requirements.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit