HYRIG BB5 Ethylene Cryogenic Pump – API 610 Barrel Type Multi-Stage Between-Bearing Centrifugal Pump for LNG / Ethylene Low Temperature Service (–196°C)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB5 Ethylene Cryogenic Pump: API 610 barrel type multi-stage between-bearing design for high pressure cryogenic liquids (LNG, ethylene, liquid methane). Flow 20-800 m³/h, head 800-3000 m, temp –196°C to –100°C, design pressure up to 320 bar. Barrel casing handles thermal contraction with center‑in design. Austenitic stainless steel or 9% Ni steel, fully impact tested. API 682 tandem dry gas seal or dual seal. Pull-out cartridge for easy maintenance.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB5 Ethylene Cryogenic Pump is a heavy-duty, multi-stage, barrel type (radial split outer barrel), between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for high pressure cryogenic liquid handling including liquefied natural gas (LNG), liquid ethylene (–104°C), liquid methane, and other light hydrocarbon cryogenic liquids down to –196°C (liquid nitrogen temperature, for specialized services), this pump features a cylindrical outer barrel casing made from impact tested austenitic stainless steel or 9% nickel steel. The BB5 barrel configuration is required at high pressures (100–300 bar) and for hazardous cryogenic fluids because it provides superior containment of cold, volatile liquids, manages thermal contraction, and allows end‑pull‑out extraction of the rotating assembly without disturbing cryogenic piping.

Unlike submerged electric motor pumps (in‑line) often used for LNG, the HYRIG BB5 is a top‑side, above‑ground barrel pump used where high differential head, high pressure, and non‑submersible drivers (electric motor or turbine) are required – for example ethylene export terminals, LNG peak shaving plants, high pressure cryogenic injection, and regasification bypass streams.

Key Technical Parameters

  • Pump Type: API 610 BB5 Barrel Type, Multi‑Stage (2 to 12 stages), Between‑Bearing Centrifugal Pump

  • Flow Range: 20 – 800 m³/h (typical: 100–600 m³/h for LNG/ethylene terminals)

  • Head Range: 800 – 3000 m (80–300 bar discharge pressure)

  • Working Temperature: –196°C to –100°C (depending on media: LNG –162°C, ethylene –104°C, liquid N₂ –196°C)

  • Design Pressure: Up to 320 bar (barrel hydrostatically tested at cryogenic and ambient conditions)

  • Structure: Barrel casing with integral thermal contraction control (cold‑center design), between‑bearing internal cartridge, radially split outer barrel with threaded or bolted head.

  • Seal Standard: API 682 mechanical seal – tandem dry gas seal (Plan 72+75) with heated nitrogen barrier to prevent seal face freezing and ensure zero emissions; or Plan 53B with low temperature barrier fluid that remains fluid at –196°C (special fluids).

  • Materials: Austenitic stainless steel (304L, 316L, 304/316) for barrel and all wetted parts for service down to –196°C – full Charpy impact testing per ASTM A370. 9% Nickel steel (ASTM A353/A522) for larger LNG barrels where higher strength required at –162°C. Internal cartridge impellers/diffusers from 316L or duplex stainless steel; hardened wear rings; all fasteners impact tested.

  • Application: High pressure LNG / ethylene transfer pump from storage to vaporizers or loading arms; cryogenic pipeline booster pump; ethylene production plant charge/reflux pump at cryogenic temperatures; high pressure injection of cryogenic fluids for industrial processes.

Key Features

  • API 610 BB5 Compliance – Highest international standard for severe cryogenic, high pressure continuous duty pumps.

  • Barrel Casing for Cryogenics – Cylindrical barrel with cold‑center design allows the internal cartridge to contract uniformly; the outer barrel is also impact tested and supports thermal gradients without distortion.

  • End Pull‑Out Cartridge – Complete rotating assembly (impellers, diffusers, bearings, seals) withdraws axially from the barrel without disturbing suction or discharge cryogenic piping – essential for services where downtime costs are extreme.

  • Multi‑Stage High Head at Cryogenic Temperatures – Up to 12 stages generate 800–3000 m head, delivering high pressure liquid for long pipelines or direct injection into high pressure systems without additional pumps.

  • Full Cryogenic Impact Testing – All pressure containing components, including barrel, head, and internal cartridge, are impact tested at the minimum design temperature to ensure fracture toughness.

  • Low NPSH for Cryogenic Boiling Liquids – First stage impeller specially designed for low net positive suction head (NPSH) required for saturated cryogenic liquids near boiling point (e.g., LNG at –162°C). Inducer optional.

  • Leak‑Free Sealing at Cryogenic Conditions – API 682 tandem dry gas seal with heated nitrogen purge (Plan 72+75) prevents moisture freezing and ensures zero product leakage; the seal gas also purges the primary vent to a safe recovery system.

  • Thermal Isolation & Cold Bearing Support – Bearing housings are thermally isolated from the cold barrel; extended shaft heats external bearing and seal areas to prevent ice formation. Bearing lubrication system includes oil heater circulation for extremely cold ambient conditions.

  • High Efficiency Cryogenic Hydraulics – CFD optimized impeller and diffuser profiles maximize efficiency even with very low viscosity cryogenic fluids (LNG viscosity similar to water).

  • Heavy Duty Rotor Dynamics – Between‑bearing short span with large diameter stainless steel shaft, tilting pad bearings, and positive displacement oil system ensures vibration‑free operation across flow range.

  • Full Cryogenic Hydrostatic Test – Each pump is tested at ambient, then optionally liquid nitrogen cold test (with customer witness) to verify NPSH and performance at operating temperature.

Typical Applications

  • High pressure LNG transfer pump from storage tank to vaporizers (peak shaving plants, import terminals)

  • Ethylene product transfer in petrochemical plants (cryogenic charge or reflux service)

  • Liquid methane / liquid ethane ship loading pumps (high head)

  • Cryogenic pipeline booster pumps for long distance LNG lines

  • High pressure injection of cryogenic liquids for enhanced gas recovery (EGR) or industrial cooling

  • Replacement of low efficiency submerged pumps where above‑ground maintenance is preferred

Why HYRIG?
HYRIG combines cryogenic engineering excellence with API 610 BB5 reliability. Each BB5 Ethylene Cryogenic Pump is designed with full cryogenic impact testing, finite element analysis for thermal contraction management, API 682 dry gas seal systems with heated purging, CFD optimized multi‑stage hydraulics for low NPSH, and end‑pull‑out cartridge maintainability. Our pumps are serving LNG terminals and ethylene plants worldwide, delivering safe, emission‑free, and reliable high pressure cryogenic pumping in the most demanding low temperature environments.

Contact Us
For technical quotation, multistage hydraulic selection, cryogenic material certification, or custom engineered solutions for your LNG / ethylene / liquid methane high pressure system, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your flow, head, temperature (down to –196°C), and NPSH conditions.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit