HYRIG BB5 High-Pressure Rich Solvent Pump – API 610 Barrel Type Multi-Stage Between-Bearing Centrifugal Pump for High Pressure Acid Gas Removal Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB5 High-Pressure Rich Solvent Pump: API 610 barrel type multi-stage between-bearing design for high pressure rich solvent (amine or methanol) in acid gas removal. Flow 20-500 m³/h, head 800-2500 m (80-250 bar), temp -75°C to 150°C, design pressure up to 260 bar. Corrosive service materials (316L/duplex), full impact tested. API 682 dual or tandem dry gas seal. Barrel casing with pull-out cartridge for safe containment and maintenance. High efficiency multistage hydraulics, low NPSH first stage.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB5 High-Pressure Rich Solvent Pump is a heavy-duty, multi-stage, barrel type (radial split outer barrel), between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for high pressure rich solvent service in acid gas removal units (AGRU) – where the solvent (amine, e.g., MDEA/DEA, or low temperature methanol, e.g., Rectisol) is loaded with CO₂ and H₂S at elevated pressures (80–250 bar) – this pump transports the rich solvent from the high pressure absorber bottom to the regenerator (stripper) or to flash drums. The BB5 barrel configuration is mandatory for these extreme pressures and for handling hazardous, corrosive, and often toxic acid gases because it provides superior pressure containment, eliminates leak paths, and allows end‑pull‑out extraction of the internal cartridge without disturbing the high pressure piping.

Rich solvent at high pressure is challenging: it often contains wet acid gases (H₂S/CO₂) that are corrosive, may form solid deposits (ammonium bisulfide or carbamate), and operates at cryogenic temperatures for methanol (–75°C) or elevated temperatures for amine (up to 120-150°C). The HYRIG BB5 delivers the safety, corrosion resistance, and maintainability required for continuous service in modern high pressure syngas purification, hydrogen production, and gas treatment plants.

Key Technical Parameters

  • Pump Type: API 610 BB5 Barrel Type, Multi‑Stage (2 to 10 stages), Between‑Bearing Centrifugal Pump

  • Flow Range: 20 – 500 m³/h (larger flows up to 800 m³/h with larger barrel frame)

  • Head Range: 800 – 2500 m (80–250 bar discharge pressure depending on absorber/regenerator differential)

  • Working Temperature: -75°C to 150°C (low temperature for methanol based processes; moderate for amine)

  • Design Pressure: Up to 260 bar (barrel hydrostatically tested to 1.5x MAWP)

  • Structure: Barrel casing with end‑pull‑out cartridge; between‑bearing support; cold‑center or hot‑center design based on temperature range.

  • Seal Standard: API 682 mechanical seal – pressurized dual seal (Plan 53B) with compatible low temperature or high temperature barrier fluid, or tandem dry gas seal (Plan 72+75) for zero fugitive emissions.

  • Materials: Austenitic stainless steel (316L) for methanol service down to -75°C; Duplex / Super Duplex (UNS S31803/S32750) for amine service with high chlorides or severe H₂S; full Charpy impact testing at minimum design temperature. Barrel made from forged stainless steel or high strength alloy steel with stainless steel internal cladding. Internal cartridge: impellers/diffusers in 316L or duplex stainless steel; hardened stellited wear rings.

  • Application: High pressure rich amine pump (MDEA, DEA, aMDEA) in high pressure natural gas treatment, refinery tail gas treating, or pre‑combustion CO₂ capture; high pressure rich methanol pump in Rectisol units operating at syngas pressures > 60 bar (e.g., for gasification based hydrogen or ammonia).

Key Features

  • API 610 BB5 Compliance – Highest integrity standard for extreme pressure, corrosive, continuous duty pumps.

  • Barrel Casing for High Pressure Safety – Cylindrical seamless barrel (forged and bored) contains the entire high pressure fluid without gasketed flange joints, preventing leakage of toxic H₂S, CO₂, and volatile solvents.

  • End Pull‑Out Cartridge – Complete rotor, bearings, interstage components, and seal can be withdrawn from the barrel as a single assembly without breaking suction or discharge high pressure piping – drastically reduces maintenance hours.

  • Multi‑Stage High Head – Up to 10 stages generate the differential pressure needed to send rich solvent from high pressure absorber to lower pressure regenerator (or through high pressure drop letdown valves), eliminating the need for additional pumps.

  • Corrosion Resistance Tailored to Solvent – 316L for clean methanol/CO₂/H₂S; Duplex for amine solutions containing chlorides, oxygen, or high H₂S; fully tested to resist stress corrosion cracking (SCC) and sulfide stress cracking (SSC) per NACE.

  • Low / High Temperature Integrity – For methanol service: full impact testing at -75°C; for amine service: high temperature strength up to 150°C. Centerline support feet accommodate thermal movement.

  • Low NPSH First Stage – First stage impeller optimized for the low available suction head typical of high pressure absorbers (rich solvent is often near saturation with acid gases). Optional inducer for critical NPSH cases.

  • Leak‑Free Sealing – API 682 Plan 53B uses a pressurized external barrier fluid compatible with the solvent, ensuring zero process leakage to the environment. Plan 72+75 tandem dry gas seal also available for solvent systems where gas barrier is preferred.

  • High Efficiency Multistage Hydraulics – CFD designed diffuser/impeller stages achieve efficiencies up to 85% for reduced energy consumption over decades of operation.

  • Heavy Duty Rotor Dynamics – Between‑bearing short span, large diameter shaft, tilting pad bearings, and forced oil or oil mist lubrication provide vibration‑free operation even at high speeds and varying loads.

  • Full Hydrostatic & Leak Testing – Each BB5 pump assembly is hydrotested to 1.5x MAWP and helium leak checked on all barrel to head joints.

Typical Applications

  • High pressure rich amine pump in natural gas sweetening (high pressure amine absorption, e.g., 150 bar natural gas)

  • Rich solvent circulation in pre‑combustion CO₂ capture for hydrogen plants (physical solvents at high pressure)

  • High pressure Rectisol rich methanol pump (coal gasification syngas purification above 60 bar, often up to 100–120 bar)

  • Refinery high pressure off‑gas amine treater (HP tail gas treating unit)

  • High pressure acid gas removal in blue hydrogen production (SMR/ATR with CO₂ capture)

  • Replacement of older BB3 or non‑API pumps where safety and high pressure integrity demand BB5 barrel configuration

Why HYRIG?
HYRIG combines deep expertise in high pressure acid gas removal with API 610 BB5 barrel pump design. Each BB5 High‑Pressure Rich Solvent Pump is engineered with finite element analysis for barrel pressure integrity up to 260 bar, rotordynamics analysis for high speed stability, material selection optimized for the specific solvent (amine or methanol), API 682 sealing systems for zero emissions, and end‑pull‑out cartridge maintainability. Our pumps are installed in high pressure gas treating facilities worldwide, providing safe, reliable, and efficient rich solvent circulation at extreme pressures.

Contact Us
For technical quotation, multistage hydraulic selection, material qualification (316L / Duplex / 9% Ni for low temp), or custom solutions for your high pressure acid gas removal unit, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your solvent type (amine or methanol), flow, head, pressure, temperature, and H₂S/CO₂ loading.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit