HYRIG VS6 Liquid Oxygen Pump – API 610 Vertical Barrel Multistage Centrifugal Pump for Cryogenic Oxygen Service (–183°C)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG VS6 Liquid Oxygen Pump: API 610 vertical barrel multistage design for cryogenic liquid oxygen, nitrogen, argon. Flow 50-2000 m³/h, head 100-800 m, temp –196°C to –150°C, design pressure up to 50 bar. Vertical can type provides very low NPSH. Austenitic stainless steel (304/316L), full impact tested. API 682 tandem dry gas seal with heated barrier (Plan 72+75). Suitable for ASU, tank truck loading, oxygen pipeline booster.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG VS6 Liquid Oxygen Pump is a heavy-duty, multistage, vertical barrel (can type) centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for liquid oxygen (LOX) and other cryogenic industrial gases – including liquid nitrogen (LIN), liquid argon (LAR), and liquefied natural gas (LNG) – this pump features a vertical barrel design with the suction inlet located at the bottom of the can. The VS6 configuration is preferred for cryogenic services because:

  • It provides exceptional low NPSH performance – essential for boiling cryogenic liquids.

  • The vertical arrangement minimizes footprint and simplifies cold box integration.

  • The multistage barrel allows heads up to 800 m in a single pump.

Liquid oxygen is a strong oxidizer (–183°C boiling point). Materials must be fully compatible with oxygen service (clean, non-reactive, non‑combustible). The HYRIG VS6 uses austenitic stainless steel with strict oxygen cleaning and passivation, plus API 682 dry gas seals with inert nitrogen barrier to prevent any ingress of moisture or hydrocarbons.

Key Technical Parameters

  • Pump Type: API 610 VS6 Vertical Barrel, Multistage (2 to 8 stages), Between‑Bearings (can type)

  • Flow Range: 50 – 2000 m³/h (typical ASU product pumps: 200–1500 m³/h)

  • Head Range: 100 – 800 m (higher with more stages or higher speed)

  • Working Temperature: –196°C to –150°C (LOX –183°C, LIN –196°C, LAR –186°C)

  • Design Pressure: Up to 50 bar (higher upon request for pipeline or injection service)

  • Structure: Vertical barrel (can) with suction bell at bottom, discharge nozzle above grade; internal multistage cartridge; shaft supported by heavy duty thrust and journal bearings at top; optional bottom bearing for deep cans.

  • Seal Standard: API 682 mechanical seal – tandem dry gas seal (Plan 72+75) with heated nitrogen barrier to prevent ice formation and ensure zero oxygen leakage.

  • Materials: Austenitic stainless steel (304L, 316L) for all wetted parts; full Charpy impact testing at –196°C; oxygen cleaning and degreasing per ASTM G93 / CGA 4.1. Shaft from 316L or 17-4 PH (low magnetic permeability optional).

  • Application: Air separation unit (ASU) liquid oxygen product pumps; LOX transfer to storage or vaporizers; high pressure oxygen injection for chemical processes; liquid oxygen tanker loading; oxygen pipeline booster.

Key Features

  • API 610 VS6 Compliance – Highest standard for vertical, high reliability, continuous cryogenic service.

  • Excellent Low NPSH Performance – Suction impeller immersed deep in the can, using static head of liquid column to provide positive NPSH margin; first stage inducer available for extremely low NPSH.

  • Vertical Can Saves Space – Pump sits inside a cold box or above grade pit, requiring minimal ground area – ideal for oxygen plant layouts.

  • Multistage High Head – Up to 8 stages generate 100–800 m head, eliminating need for multiple pumps in series for pipeline or high pressure vaporizer feed.

  • Cryogenic Integrity – All components impact tested; austenitic stainless steel retains toughness at –196°C; thermal contraction managed by vertical free‑standing design.

  • Oxygen Compatibility – Full oxygen cleaning, passivation, and non‑reactive material selection per CGA G-4.1 and EIGA guidelines; stainless steel construction eliminates rust and combustion risks.

  • Leak‑Free Sealing with Nitrogen Barrier – API 682 tandem dry gas seal with Plan 72 (heated nitrogen) prevents moisture from freezing and ensures zero oxygen emission; Plan 75 collects any minute leakage for safe venting.

  • Low Magnetic Permeability Option – For oxygen service where magnetic particles could cause ignition, low magnetic version (316L with controlled ferrite) is available.

  • Heavy Duty Bearings – Top mounted angular contact ball thrust bearings and journal bearings; oil mist or forced oil lubrication; optional bottom guide bearing (PTFE/graphite) for deep cans.

  • Easy Maintenance – Pump can be removed from the top without emptying the cold box or disturbing piping; complete cartridge style internals.

  • Full Cryogenic Testing – Performance and NPSH verification at liquid nitrogen temperature optionally witnessed by customer.

Typical Applications

  • Air separation unit (ASU) liquid oxygen export pump (from storage tank to vaporizer or truck loading)

  • LOX transfer to high pressure oxygen pipeline (steel mill, chemical plant)

  • High pressure liquid oxygen injection for gasification reactors or oxygen enhanced combustion systems

  • Liquid oxygen backing pump for rocket engine test stands (high flow, moderate head)

  • Liquid nitrogen (LIN) and liquid argon (LAR) service with same VS6 platform (material sealing adjusted)

Why HYRIG?
HYRIG brings specialized cryogenic and oxygen service engineering to API 610 VS6 pumps. Each VS6 Liquid Oxygen Pump is designed with full impact tested stainless steel, oxygen cleaning per international standards, API 682 tandem dry gas seals with heated nitrogen barrier, low NPSH hydraulics, and can type upright construction for space and reliability. Our VS6 pumps are installed in major ASUs and oxygen plants worldwide, delivering the safety and reliability essential for liquid oxygen service.

Contact Us
For technical quotation, multistage hydraulic selection, oxygen cleaning certification, or custom engineered solutions for your liquid oxygen / cryogenic fluid application, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your flow, head, temperature, and NPSH requirements, including full documentation for oxygen service compliance.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit