HYRIG can supply BS 1873 bellows seal globe valves. This page outlines the design, face-to-face, and testing standards applied to the valve construction to assist with engineering verification and procurement.
| Standard | Scope |
|---|---|
| BS 1873 | Design, materials, and pressure-temperature ratings for steel globe valves. |
| ASTM B16.10 | Defines face-to-face and end-to-end dimensions to ensure piping alignment. |
| ASME B16.5 | Specifies pipe flange dimensions and pressure ratings (Class 150/300). |
| API 598 | Establishes inspection, examination, and pressure test requirements. |
| Dimension | Standard |
|---|---|
| Face-to-Face (L) | ASTM B16.10 |
| Flange Dimensions | ASME B16.5 |
| Wall Thickness | BS 1873 |
Compliance with BS 1873 ensures the valve's body wall thickness, material selection, and pressure-temperature ratings are suitable for industrial service. The valve is constructed with a bolted bonnet design, allowing for inspection of the internal components (disc, seat, and bellows) without removing the entire valve from the pipeline.
ASME B16.5 flanges guarantee dimensional interchangeability with standard piping systems. API 598 testing verifies the shell strength and seat tightness. The standard requires specific test durations and allowable leakage rates depending on the valve size and pressure class.
When reviewing a valve specification against BS 1873:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Does BS 1873 cover bellows seal valves?
BS 1873 primarily covers steel globe valves. The bellows seal mechanism is an enhanced stem sealing design that is integrated into the BS 1873 valve body and bonnet dimensions.
Q: What is API 598 testing?
API 598 is the standard for valve inspection and testing. It defines the procedures for shell tests (pressure boundary integrity) and seat tests (leakage rate) for industrial valves.
Q: Can you provide 3.1 material certificates?
Yes. Material certificates for the body, bonnet, and trim components can be provided upon request to verify compliance with the specified ASTM grades.
Q: What is the typical lead time for certified valves?
Standard lead time is 4 to 6 weeks. If third-party inspection (TPI) or specific documentation is required, the lead time may be extended.
For assistance in verifying valve compliance against BS 1873 or API 598, share your project specifications. Our engineering team will confirm the dimensions, materials, and testing requirements.
For BS 1873 bellows globe valve selection, contact HYRIG: info@hyrig.com