We are a professional China OH5 pump manufacturer, offering high‑quality API 610 compliant vertical in‑line overhung pumps with the simplest possible construction. Our OH5 series features a common shaft – the motor’s extended shaft directly drives the pump impeller. There is no coupling, no independent bearing bracket, and the pump has no shaft of its own. This extremely compact, lightweight design is perfect for small flow rates, normal operating conditions, and applications where low initial cost and easy maintenance are top priorities.
What is an OH5 Pump?
According to API 610, the OH5 pump is a vertical in‑line, single‑stage overhung centrifugal pump with a close‑coupled configuration. The motor has an extended shaft that reaches directly into the pump end, carrying the impeller. The pump has no separate shaft, no coupling, and no dedicated pump bearings – the motor bearings support the entire rotating assembly. This makes the OH5 the simplest, most economical vertical in‑line pump type in the API 610 family.
Why Choose Our China OH5 Pump?
When you search for a reliable China OH5 pump manufacturer, you need a supplier who offers API 610 construction quality at a fraction of the cost of larger pump types. Our OH5 pumps are designed for:
Small flow applications (typically up to 150 m³/h)
Low to medium head (typically up to 80 m)
Normal temperature (-20°C to +120°C, depending on materials)
Clean or slightly dirty liquids (non‑abrasive)
Low‑cost pipeline boosting where budget is a concern
Simple, quick maintenance – no alignment, no coupling to adjust
Designed for Typical Working Conditions
Our China OH5 pumps run reliably in:
Small vertical pipeline systems (space‑saving)
Low flow, low to medium head duties
Normal temperature range (ambient to 120°C)
Continuous or intermittent operation
Clean water, light oil, mild chemicals
Applications where a separate bearing bracket or flexible coupling is over‑specified
Compatible Media
The OH5 pump is best suited for clean or low‑contamination liquids:
Clear water, tap water, softened water
Cooling water, chilled water, hot water (≤120°C)
Light oils, diesel, heating oil
Weak chemical solutions (non‑corrosive, non‑abrasive)
Condensate, HVAC water
Industrial service water
Key Technical Features
Standard: API 610 (11th edition) – simplified construction but follows API material and dimensional guidelines
Design: Vertical in‑line, single‑stage overhung, common shaft (motor extended shaft), no coupling, no independent pump bearings
Mounting: Directly on vertical pipeline flanges (suction and discharge in‑line)
Drive: Motor shaft extended directly into pump end (close‑coupled)
Speed: Typically 1450–2900 rpm (2‑pole or 4‑pole motor)
Flow: Up to 150 m³/h (larger on request, but OH3/OH4 recommended for big flows)
Head: Up to 80 m (higher possible with higher speed)
Temperature: -20°C to +120°C (special materials for higher temp)
Materials: Cast iron, ductile iron, carbon steel, stainless steel (304/316)
Flanges: ANSI, ASME, DIN, JIS
Bearings: Motor bearings only (no separate pump bearing housing)
Shaft sealing: Gland packing or mechanical seals (API 682 compatible)
Product Advantages
Lowest cost – no coupling, no separate bearing bracket, no pump shaft – dramatically reduces manufacturing cost
Extremely simple construction – fewer parts, less to go wrong
No alignment needed – factory‑assembled motor and pump; no coupling to align on site
Very compact – short overall length, ideal for tight vertical pipe runs
Lightweight – easy to install without heavy lifting equipment
Easy maintenance – replace the whole pump end or motor without complex disassembly
API 610 quality – even the simplest OH5 pump benefits from API material standards and hydraulic design
Good for small flow / low head – where larger OH3/OH4 pumps would be oversized and inefficient
One‑Stop Full Service
As a leading China OH5 pump manufacturer, we provide a complete one‑stop service even for this simple pump type:
Selection – we help you confirm that OH5 is the right type for your small flow, normal duty application.
Custom design – stainless steel, higher temperature seals, special flange drilling.
Manufacturing – API 610 material requirements and ISO 9001 quality.
Factory testing – hydrostatic test and performance curve (optional).
Delivery – very short lead time (stock units available).
Installation – simple vertical flange mounting; guidance provided.
After‑sales – spare pump ends, mechanical seals, gaskets, fast technical support.
Main Applications
Small pipeline boosting stations
HVAC systems (small chilled/hot water circulation)
Domestic and industrial water supply (small flow)
Light oil transfer (small volumes)
Condensate return (low temperature)
Cooling water circulation for small equipment
Water treatment polishing loops
Pressure boosting for high‑rise building floors (individual riser boosts)
General service water where cost is critical
Frequently Asked Questions (FAQ)
Q: Is the OH5 pump really API 610 compliant?
A: Yes. API 610 includes the OH5 type as a recognized vertical in‑line close‑coupled pump. While it lacks a separate bearing bracket and coupling, it still follows API requirements for materials, hydraulics, flange dimensions, and sealing systems. For many normal duty, small flow applications, OH5 is fully appropriate.
Q: What is the difference between OH3, OH4, and OH5?
A:
OH3: Independent bearings + flexible coupling (can tolerate some misalignment)
OH4: Independent bearings + rigid coupling (fixed alignment, moderate speed)
OH5: No independent bearings + no coupling – motor bearings support the impeller, motor shaft is pump shaft
OH5 is the simplest, smallest, and lowest cost, but limited to smaller flows and normal temperatures.
Q: Can I use OH5 for high temperature or large flow?
A: No. For high temperature (>120°C), high flow (>150 m³/h), or high head (>80 m), we recommend OH3 or OH4 which have independent bearing brackets and proper thermal compensation. The OH5 motor bearings are not designed for heavy radial loads or extreme heat.
Q: How do you replace the mechanical seal on an OH5 pump?
A: Because there is no coupling, the pump end must be disassembled from the motor. However, the design is very simple – remove the pump casing, then access the seal. Alternatively, you can keep a spare pump end assembly and swap it quickly, then repair the seal offline.
Q: Do you stock OH5 pumps for fast delivery?
A: Yes. We stock common OH5 sizes in cast iron and 304 stainless steel. Lead time is 3–7 days for standard models. Custom orders (316SS, special flanges) take 15–20 days.
Q: Is the OH5 pump less reliable than OH3/OH4?
A: For its intended duty (small flow, clean liquid, normal temperature, intermittent or light continuous duty), the OH5 is very reliable. For severe heavy‑duty continuous service, OH3/OH4 are better due to separate heavy‑duty bearings and couplings. Choose the right tool for the job.
Why Choose Us as Your China OH5 Pump Supplier
Specialists in API 610 pumps – even the simple OH5 is built to API material standards
Low cost – we manufacture in volume and pass savings to you
Fast delivery – standard OH5 pumps ready to ship within days
Quality assurance – every pump is pressure tested before leaving the factory
Technical support – we help you decide between OH5, OH3, and OH4
Full spare parts availability – pump ends, seals, gaskets, motors
Contact Us
For inquiries, technical support, or a custom quotation for our low‑cost China OH5 pump, please contact us at:
info@hyrig.com
Choose our China OH5 pump – simple, low cost, and perfectly matched to small flow vertical pipeline duties.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.