China VS3 Pump – API 610 Vertical Submerged Multistage Diffuser Pump (Long Shaft, Single Casing, High Head)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
We are a professional China VS3 pump manufacturer producing API 610 vertical suspended multistage diffuser type pumps. Multistage construction, long shaft with intermediate bearings, single casing. Designed for high head submerged applications, tank farm pressure boosting, and deep well service. Achieves high pressure without needing a double casing. One‑stop service.

Conatct For Details
DetailReview(0)Additional

We are a professional China VS3 pump manufacturer, offering high‑quality API 610 compliant vertical suspended multistage diffuser type pumps. Our VS3 series features a multistage diffuser bowl assembly, a long shaft with multiple intermediate bearings, and a single casing design. Unlike single‑stage VS1/VS2 pumps, the VS3 uses multiple impellers and diffusers stacked inside a column pipe to achieve high heads (up to 400+ meters) while remaining submerged. This makes the VS3 the ideal choice for high head submerged applications, tank farm pressure boosting, deep sump high pressure transfer, and well intake where head requirements exceed the capability of single‑stage vertical pumps.

What is a VS3 Pump?

According to API 610, the VS3 pump is a vertical suspended, multistage, diffuser type, single‑casing, submerged pump. Key characteristics:

  • Vertical suspended design – the pump is mounted on a top plate (tank roof or pit cover) and suspended into the liquid.

  • Multistage diffuser bowls – several stages (typically 2 to 10+) of impellers and stationary diffusers are stacked inside a column pipe, each stage adding pressure.

  • Long shaft with intermediate bearings – the shaft runs through the assembly and is supported by sleeve bearings between stages and along the column.

  • Single casing – the bowl assembly and column pipe form the wetted “casing”; no outer pressure barrel (unlike VS7). This reduces weight and cost while still achieving high head.

  • High head submerged capability – because the pump is submerged, NPSH requirements are easily met, and the suction is always flooded.

Why Choose Our China VS3 Pump?

When you search for a reliable China VS3 pump manufacturer, you need a supplier who understands multistage hydraulic design, long shaft dynamics under high head, and the demands of tank farm boosting. Our VS3 pumps are engineered for:

  • High head submerged duties (up to 600 meters, depending on stage count)

  • Tank farm pressure boosting (e.g., supplying pipelines from storage tanks)

  • Deep sump and underground tank high pressure transfer

  • Water intake from deep reservoirs or wells (high head)

  • Multistage diffuser efficiency – better than volute designs for high head multistage

  • Single casing economy – lower cost than double‑casing VS7 pumps for moderate high head

  • Low NPSH requirement – the submerged suction ensures cavitation‑free operation

Designed for Typical Working Conditions

Our China VS3 pumps run reliably in:

  • Tank farm booster stations (raising pressure from tank level to pipeline pressure)

  • Deep sump high head transfer (from underground tanks to process units or loading racks)

  • Seawater intake and lift stations (multistage pumping from sea or river to plant)

  • Mine dewatering (deep pits, high head)

  • Refinery and chemical plant sumps requiring high differential pressure

  • Firewater storage tank booster pumps (submerged, high head)

  • Continuous 24/7 operation at high heads

Compatible Media

The VS3 pump handles clean or moderately clean liquids, typically water, light hydrocarbons, and mild chemicals:

  • Water (fresh, cooling, seawater with appropriate materials)

  • Light hydrocarbons (low viscosity, clean: naphtha, light crude, condensate)

  • Petroleum products (diesel, gasoline, jet fuel – with suitable materials and sealing)

  • Mild chemicals (with stainless steel or special alloys)

  • Condensate (low NPSH is not the main challenge here, but submerged suction helps)

  • Industrial water, firewater

**Avoid abrasive or dirty fluids – multistage diffusers have tight clearances and intermediate sleeve bearings that rely on clean liquid lubrication.

Key Technical Features

  • Standard: API 610 (11th edition), API 682 for mechanical seals (at top)

  • Design: Vertical suspended, multistage (2 to 10+ stages), diffuser type, single casing, long shaft

  • Hydraulics: Stacked diffuser bowls with radial or mixed flow impellers

  • Submersion depth: Standard 3–15 meters; deeper on request with additional intermediate bearings

  • Flow: 10 – 800 m³/h (typical range 30‑600 m³/h)

  • Head: Up to 600 meters (depending on number of stages and speed)

  • Temperature: -20°C to +180°C (higher with special materials and seal plans)

  • Materials: Carbon steel, stainless steel (304, 316, duplex), bronze (for bearings), special alloys

  • Intermediate bearings: Sleeve type (liquid lubricated by pumped fluid – cleanliness is critical)

  • Discharge: Flanged nozzle at top plate – ANSI, ASME, DIN, JIS (high pressure rating)

  • Shaft sealing: Mechanical seal or packing at the top (above liquid level) per API 682

  • Column pipe: Flanged sections, contains diffuser bowls and shaft bearings

Product Advantages

  • High head in a single submerged unit – eliminates the need for horizontal multistage pumps plus suction lift issues.

  • Submerged suction avoids cavitation – the pump is always flooded, so low NPSH is not a concern even at high speeds.

  • Single casing economy – lower cost than double‑casing VS7 pumps while still handling significant pressure (up to typical Class 300 rating).

  • Diffuser efficiency – multistage diffusers provide excellent hydraulic efficiency and smooth operation compared to volute stages.

  • Long shaft with intermediate bearings – stable operation even at deep submersion and high rotational speeds.

  • API 610 compliance – designed for continuous heavy‑duty service in demanding industrial environments.

  • Tank top mounting – saves floor space and eliminates expensive pits for many applications (if tank roof is strong enough).

One‑Stop Full Service

As a leading China VS3 pump manufacturer, we provide a complete one‑stop service for multistage submerged pumps:

  1. Selection & hydraulic calculation – we determine the number of stages, impeller trims, and bearing spacing for your head, flow, and submersion depth.

  2. Custom design – stage count variation, high pressure flanges, special materials (duplex, super duplex, etc.).

  3. Manufacturing – precision diffuser casting, shaft dynamic balancing, intermediate bearing alignment.

  4. Factory testing – hydrostatic test, multistage performance test (head vs flow), vibration and bearing temperature monitoring.

  5. Delivery – lead time for standard VS3 pumps: 14‑24 weeks; expedited possible.

  6. Installation & commissioning – on‑site guidance for top plate mounting, column verticality, and shaft alignment.

  7. After‑sales – complete spare bowl assembly (stages), spare shaft with bearings, wear rings, mechanical seals, field repair.

Main Applications

  • Tank farm booster pumps (raising pressure from atmospheric storage to pipeline or process pressure)

  • Deep sump high head transfer (underground tanks, pits, sumps)

  • Seawater lift stations (multistage vertical pumps for high head intake)

  • Mine dewatering (deep mines, high head clear water)

  • Plant firewater booster pumps (submerged in firewater tanks)

  • Water treatment high lift stations (from basins to higher elevations)

  • Refinery slops and waste sump boosting (clean liquids)

  • Pipeline tank suction filling for high pressure lines

Frequently Asked Questions (FAQ)

Q: What is the difference between VS3 (single casing multistage) and VS7 (double casing multistage)?
A: VS3 has a single casing – the diffuser bowls and column pipe are inside the pumped liquid and are exposed to line pressure. It is lighter and lower cost, suitable for pressures typically up to 4–5 MPa (Class 300). VS7 has a double casing – an inner bowl assembly (like VS3) plus an outer barrel that contains the pressure. Used for much higher pressures (>5 MPa) or hazardous liquids requiring secondary containment. For most tank farm boosting and deep sump applications, VS3 is sufficient and more economical.

Q: How many stages can your VS3 pump have?
A: Typically 2 to 10 stages. For very high heads (e.g., >500 meters), we can design up to 12–15 stages with appropriate shaft and bearing sizing. Alternatively, we consider two VS3 pumps in series or a VS7 pump. Consult our engineers.

Q: Can I use a VS3 pump for crude oil transfer (high viscosity)?
A: For moderately viscous crude (say, <300 cSt), a slower speed and larger clearances may be acceptable. However, multistage diffuser pumps are best suited for low to medium viscosity clean liquids. For heavy crude, we might recommend a single‑stage VS2 with a volute or a positive displacement pump.

Q: How do you maintain the intermediate shaft bearings?
A: The bearings are sleeve type and rely on the pumped liquid for lubrication. For clean liquids, they have a long life. When wear occurs, the entire pump column must be withdrawn from the tank or sump, and the bearings are replaced during overhaul. We provide bearing material options (bronze, carbon, PTFE) depending on the liquid.

Q: Can the VS3 pump run dry?
A: No. The liquid level must always cover the suction bell and at least the lower bearings. Running dry will destroy the intermediate bearings and mechanical seal. We recommend a low‑level cutout switch.

Q: Do you offer NACE compliant VS3 pumps for sour service?
A: Yes. We can supply VS3 pumps with NACE MR0175 / MR0103 compliant materials (hardness controlled carbon steel or stainless steel, appropriate elastomers) for H₂S service. Please specify the fluid composition.

Why Choose Us as Your China VS3 Pump Supplier

  • Extensive experience in multistage diffuser pumps – both in vertical submerged (VS3) and barrel (VS7) configurations

  • Ability to build custom stage counts to precisely match your head requirement

  • True one‑stop service – from hydraulic design to on‑site commissioning in your tank farm or sump

  • Significant cost savings – typically 30‑40% lower than Western VS3 specialists

  • Fast after‑sales support – local China response, global spare parts logistics

  • Full documentation – stage‑by‑stage performance curves, NPSH, vibration & bearing temperature records, material certificates

Contact Us

For inquiries, technical support, or a custom quotation for our China VS3 pump (vertical submerged multistage diffuser, long shaft, high head, tank farm boosting), please contact us at:
info@hyrig.com

Choose our China VS3 pump – multistage high head in a single submerged unit, reliable boosting from your tank farm or deep sump.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit